Network Setup - A-Link WNAP4G User Manual

3.1.1

Network Setup

This router allows you to do LAN Setup and Internet Setup. Please see the
following instructions to do the necessary settings.
3.1.1.1
1. LAN IP Address: The local IP address of this device. The computers on
your network must use the LAN IP address of this device as their Default
Gateway. You can change it if necessary.
2. Subnet Mask: Input your Subnet mask. (All devices in the network must
have the same subnet mask.) The default subnet mask is 255.255.255.0.
3.1.1.2
This device is equipped with two WAN Interfaces to support different WAN Type
connections.
A-LINK WNAP4G User Manual
LAN Setup
Internet Setup
21