A-Link WNAP4G User Manual page 41

address manually for Primary DNS address and secondary DNS address.
2. LAN IPv6 address settings: LAN IPv6 address and LAN IPv6 Link-Local
address.
3. Address auto configuration settings: Disable or enable this auto
configuration setting. You may set stateless or stateful (Dynamic IPv6), and
also check if need to send Router advertisement messages periodically.
3.1.2.5
following settings.
1 IPv6 in IPv4 Tunnel Settings: you may add remote / local IPv4 address
and local IPv6 address, then set DNS address manually for Primary DNS
address and secondary DNS address.
2 LAN IPv6 address setting: LAN IPv6 address and LAN IPv6 Link-Local
A-LINK WNAP4G User Manual
When "IPv6 in IPv4 Tunnel" is selected you need to do the
41