A-Link WNAP4G User Manual page 29

a. WAN Type: Choose Dynamic IP Address.
b. Host Name: Optional, required by some ISPs, for example, @Home.
c. ISP registered MAC Address: Some ISP (Cable company) will record your
MAC address on PC. You can press "Clone" button to copy the MAC address
on your PC here, or you can input it manually.
d. Maximum Idle Time: The amount of time of inactivity before disconnecting
Internet connection. Set it to zero, or choosing "Auto-reconnect" mode to
disable this feature.
e. Connection Control: There are 3 options to start connection:
 Auto Reconnect (Always-on): The device will always try to link to Internet.
 Connect-on-demand: The device won't try to connect to Internet until LAN
PCs or devices try to go to Internet. Once Internet connection is established,
this device will drop the connection if maximum idle time is reached.
 Manually: The device won't try to connect to Internet until users press
"connect" button at Status page. Once Internet connection is established, this
device will drop the connection if maximum idle time is reached.
f. NAT disable: You can disable NAT feature if required.
29
A-LINK WNAP4G User Manual