System Time - A-Link WNAP4G User Manual

Press "browse" button to indicate the file name of new firmware, and then press
Upgrade button to start to upgrade new firmware on this device. If you want to
upgrade a firmware which is from GPL policy, please check "Accept unofficial
firmware".
NOTE: Please do not turn the device off when upgrade is processing.

6.3.3 System Time

1. Time Zone: Select a time zone where this device locates.
2. Auto-Synchronization: Check the "Enable" checkbox to enable this function.
Besides, you can select a NTP time server to consult UTC time.
3. Sync with Time Server: Click on the button if you want to set Date and Time
by NTP Protocol .
4. Sync with my PC: Click on the button if you want to set Date and Time using
PC's Date and Time.
Afterwards, click on "Save" to store your settings or click "Undo" to give up
A-LINK WNAP4G User Manual
95