Vlan - A-Link WNAP4G User Manual

4.3 VLAN

The VLAN function allows you to divide local network into different "virtual LAN". In some
cases, ISP may need router to support "VLAN tag" for certain kinds of services (e.g.
IPTV) to work properly.
There are four LAN ports with this router, so you can have up to 4 VLAN if required.
Those four LAN ports belong to one VLAN by default. If you want to divide them into
different VLAN, you just need to assign different "VID" for them. If ISP requests a "VLAN
Tag" with your outgoing data, please remember to check the checkbox of "Tx TAG".
If you want to map WAN ID, you can press "WAN VLAN settings", and change router type
to Bridge and add WAN Map VLAN ID to your value.
75
A-LINK WNAP4G User Manual