Product Dimensions - Dacor Epicure ER36D Installation Instructions Manual

Product Dimensions
Product tolerances: +1/16" (+1.6 mm)
GAS- ELECTRICAL ACCESS DIMENSIONS
Model A ' B I C I D' E*
5 5/8" 18 3/8" 10 3/4" 13 11116" 7/8"
ER36D
(142.9 mm) (466.7 mm) (273.0 mm) (347.7 mm) (22.2 mm)
3 13116" 18 11116" 9 318" 13 314" 1 118"
ER48D
(96.8 mm) (474.7 mm) (238.1 mm) (349.3 mm) (28.6 mm)
* The diameter on models equipped for use in Canada is ¼" (6.4mm) larger
than those stated. Canadian units come from the factory pre-wired with
an appliance cord. When installing an appliance cord on models that are
not pre-wired, the hole size must be increased to 1 118" (1 318" for model
ER48D) by removing the conduit bracket inside the range electrical access
box.
Gas regulator access,
cover removed
/
Range electrical access,
cover removed
Back of range
E Electrical connection
hole in bottom
Width:
,,1t_--
I
I,
1 9/16"---_ --(,
40 mm)
B
48" (1219 mm)
ER36D - 35 7/8" (911 mm)
ER48D - 47 7/8" (1216 mm)
_, Front of open door
30 3/4" (781 mm)-_ Front of handle
29 3/8" (746 mm) "_1 Front edge of bull nose
_28 1/4" (718 mm)-_ Front panel
26 118" (664 mm) _ Rear of front paneI/oven door
T
19"
(483 mm)
(229 mm)
15 1/4"
(387 mm)
r 1 ,I
#
1 1/16" (27 mm) to cooking
surface (top of grates) from
top of trim
Finished side
panel
(51 mm)
____t
37"
(940 mm)
to
35 3/4"
(908 mm)
24" (610 mm)
Backguard **
t
9" (229 mm)
Backguard **
3" (76 mm)
Backguard**
** Optional
dacar 5