Appearance Examples, Trim Kit Descriptions - GE Monogram ZIS36N Custom Options Manual And Installation Instructions

Advance
planning
exterior
appearance
options
Design Information
36" Built-In Refrigerator
These refrigerators are designed to be customized with
decorator door and grille panels. Field installed custom
door and grille panels are required.
Factory installed trim accommodates 1/4" thick custom
panels, Lexan (R_ o r stainless steel panel kits.
Appearance options are accomplished through the
use of one or more trim kits. Kits must be ordered
separately.
Door and grille panel sizes vary to accommodate the kit
being used. Sizes are provided in this booklet.
You should:
1. Select the appearance option.
2. Order the trim kit(s) for that option.
3. Order the custom door and grille panels from the
cabinet manufacturer. The exact dimension for each
trim kit application is provided in this booklet. Find
and pull out the page for your application and fax or
send it to the cabinet manufacturer. The cabinet
manufacturer must have this information to con-
struct the panels accurately.
4. Determine the final installation situation and order
matching side panels.
3/4" thick custom panels-Without trim kits
A raised panel design, screwed or glued to a 1/4" thick
backing can be used. See pages 7 and 11 for panel
sizes and clearances.
Appearance
Examples
Trim kit
Descriptions
J
1/4"and 3/4" panels with 1/4"Custom panels with 1/4" Custom panels with
standard handles. No trim custom handles. Trim Kit Tubular Stainless Steel
kits required. ZKHt. handles. Trim Kit ZKHSS1.
Door Handle Options
ZKH1 - Provides the necessary framework to install
custom handles, of your choice, onto 1/4" thick panels.
(Handles not included.)
ZKHSS1 - Tubular stainless steel handles for 1/4" thick
panel installations.
ZKH]I - Provides the necessary framework to install
custom handles, of your choice, onto 3/4" thick panels.
(Handles not included.) This kit must be used in
combination with ZKT36.
ZKHTSS1 - Tubular stainless steel handles for 3/4" thick
panel installations. This kit must be used in combination
with ZKT36.
3/4" Custom panels with
custom handles. Trim kits
ZKT35 & ZKHT1.
3/4" Custom panels with
Tubular Stainless Steel
handles and custem
dispenser collar. Trim
Kits ZKHTSS1, ZKT35 &
ZWCD1.
Dispenser Options
ZWCD1 - Provides for the installation of a custom
collar trim on the dispenser and for one continuous
custom panel on the freezer door. This kit can be used
alone, or with all other kits.
Toekick Option
ZWT1 - White toekick (supplied toekick is black).
Includes a white toekick to fit 36, 42, 48"side-by-side
models and 36" bottom mount and single door models.
Grille Panel Options
ZG2- Provides 1/4" grille panel frame side pieces for
83",83-1/2"and 84-1/2"installation heights. The supplied
grille panel frame is factory set for 84".
Custom Panel Options
ZKT36 - Provides for the installation of 3/4" thick
trimless custom door and grille panels with the
standard (supplied) full length handle.