Password Initialization; Parameter Editor - MeiTrack GT30i User Manual

Meitrack gps personal tracker

Hide thumbs Also See for GT30i:

Table of Contents

Note: Send SMS "Default?" to the device. Within 120 seconds, send this SMS command to the tracker.

### is the ending character and is required in the text message.

Example: W000000,990,099###

20. Password Initialization

Command: W888888,999,666

Description: This resets the password back to factory default and can be used in case you forget your password.

Note: Send SMS "Default?" to the device, and then, within 120 seconds, send this SMS command to the tracker to set the password

back to factory default (000000).

If you have set an authorized telephone number, when the password has been successfully preset the telephone will receive

W888888,999,666

Example: W888888,999,666

For more details regarding SMS commands, please go to Annex 1 Command List.

The tracker can also be configured by computer using the Parameter Editor. This method is much easier and user friendly.

File Name:

MEITRACK GT30i User Guide

Project:

GT30i

Sub Project:

User Guide

Revision:

V7.3

Creator:

Cavana Cheung

Creation Date:

Update:

Page:

Confidential:

External Documentation

2010-10-10

2012-07-03

- 17 - of 25

- 17 -

Table of Contents