Meiligao (MEITRACK), or transmitted in any form, either electronically or mechanically, including photocopying and recording. In no event shall Meiligao (MEITRACK) be liable for direct, indirect, special, incidental, or consequential damages (including but not limited to economic loss, personal injury, and loss of asset and property) arising out of the use or inability or illegality to use the product or documentation.
If you require the function of sending an SMS location report to the authorized phone number when it makes a call to the MT88, please make sure the SIM installed supports displaying caller ID; Before installing the SIM card, turn off the power for MT88;...
MT88 is connected to the GSM network Flashing (1 second on and 2 seconds off) MT88 is not connected to the GSM network 6.4 Track by Calling Make a call to MT88 and it will report with one SMS. For example, Now,110727 02:48,V,16,23Km/h,61%,http://maps.google.com/maps?f=q&hl=en&q=22.540103,114.082329 &ie=UTF8&z=16&iwloc=addr&om=1 Click on the link then the location can be shown directly on Google Maps on your mobile phone.
If no preset phone number, it is empty (default is empty). Send command “0000, A71” to delete all phone numbers. When the SOS button is pressed, MT88 will make a call to phone number 1, 2 and 3. It will stop calling when one number answers.
File Name: MEITRACK MT88 User Guide Creator: Cavana Cheung Project: MT88 Creation Date: 2010-08-31 Update: 2012-07-03 Sub Project: User Guide Page: - 8 - of 15 Revision: V2.2 Confidential: External Documentation SMS Get: IMEI, A72, OK Note: Authorize a phone number to make a silent call to the tracker. The tracker will answer the call automatically and allows the caller to listen to what is happening around the tracker.
‘Prolific USB-to-Serial Comm Port’ as the following picture shows. Note: Remember this Com number. It needs to be input into the MEITRACK Parameter Editor. It is COM3 in this example and it would be COM4 or COM5… in your computer.
Click ‘Read Settings’ button to show the default or previous settings of the tracker. Note: MEITRACK Parameter Editor is in the CD. The language will be automatically adjusted to be the same as your PC operation system’s language. Please use “Ctrl+L” to change the language.
Page 11
File Name: MEITRACK MT88 User Guide Creator: Cavana Cheung Project: MT88 Creation Date: 2010-08-31 Update: 2012-07-03 Sub Project: User Guide Page: - 11 - of 15 Revision: V2.2 Confidential: External Documentation Item Description User Password SMS password for sending SMS commands and defaulted as 0000.
Page 12
A phone number to receive selected event’s SMS reports. Event Selected event’s SMS reports will be sent to authorized phone number. For more details, please refer to MEITRACK GPRS/SMS Protocol. For description of events from SOS/Input 1 Active to Tow Alarm, please refer to tap II GPRS Tracking.
Report when MT88 exits Geo-fence. Geo-fence can be changed on tap III Main Settings. No GPS Signal Report when MT88 enters GPS blind area or no GPS signal. Get GPS Signal Report when MT88 exits GPS blind area or get GPS signal.
Page 14
Interval = 0, stop tracking by time interval. Max time interval = 65535*10 seconds GPRS Report Times = 0, report without limit. = [1,65535], set report times, MT88 will stop reporting when reaching the times. IP & Port Input server’s IP address and port number.
Page 15
Report when MT88 exits Geo-fence. Geo-fence can be changed on tap III Main Settings. No GPS Signal Report when MT88 enters GPS blind area or no GPS signal. Get GPS Signal Report when MT88 exits GPS blind area or get GPS signal.