Table of Contents
Advertisement
Command: W******,026,XX
Description: This command puts the tracker in power down mode when it is inactive or immobile for a period of time. In Power
Down mode, GPS stops working, GSM enters sleep mode and stops sending out messages. The device remains in this mode until it
is activated by message, incoming calls, movement, or triggered by the button.
Note:
XX=00, to turn off this function;
XX=01~99, to turn on Power Down after a specified period of being inactive (or stationary). It is in unit of minute.
Example: W000000,026,10
The tracker will enter power down mode after it is inactive (or stationary) for 10 minutes.
20. Get IMEI
Command: W******,601
Description: Get IMEI of the tracker. IMEI is 15 digits
Example: W000000,601
21. Initialization
Command: W******,990,099###
Description: This sets all settings (except for the password) back to factory default.
Note: Send SMS "Default?" to the device. Within 120 seconds, send this SMS command to the tracker.
### is the ending character and is required in the text message.
Example: W000000,990,099###
22. Password Initialization
Command: W888888,999,666
Description: This resets the password back to factory default and can be used in case you forget your password.
Note: Send SMS "Default?" to the device, and then, within 120 seconds, send this SMS command to the tracker to set the password
back to factory default (000000).
If you have set an authorized telephone number, when the password has been successfully preset, the telephone will receive
W888888,999,666
Example: W888888,999,666
For more details regarding SMS commands, please go to Annex 1 Command List
23. Parameter Editor
Copyright © 2013 Shenzhen Meiligao Electronics Co., Ltd. All rights reserved.
File Name:
MEITRACK VT310 User Guide
Project:
VT310
Sub Project:
User Guide
Revision:
V7.5
Creator:
Creation Date:
Update Date:
Page:
Confidential:
External Documentation
Cavana Cheung
2010-08-26
2013-01-30
- 21 - of 30
- 21 -
Advertisement
Table of Contents
