Get Imei; Initialization; Password Initialization; Parameter Editor - MeiTrack GT30i User Manual

18. Get IMEI

Command: W******,601
Description: Get IMEI of the tracker. IMEI is 15 digits
Example: W000000,601

19. Initialization

Command: W******,990,099###
Description: This is to make all settings (except for the password) back to factory default.
Note: Send SMS "Default?" to the device, and then send (within 120 seconds) this SMS command to the
tracker.
### is the ending character and is required in the text message.
Example: W000000,990,099###

20. Password Initialization

Command: W888888,999,666
Description: This is to make the password back to factory default in case you forget your password.
Note: Send SMS "Default?" to the device, and then send (within 120 seconds) this SMS command to the
tracker to make the password back to factory default (000000).
If you had set authorized telephone number, when password preset successfully, the telephone will get
W888888,999,666
Example: W888888,999,666
For more details regarding SMS commands, please go to Annex 1 Command List.

21. Parameter Editor

The tracker can be configured by computer using the Parameter Editor.
GPS Tracker Parameter Editor V1.39
Please refer to <GPS Tracker Parameter Editor> for more information.
- 16 -