System Alert To User Through Telephone - O.Y.L. Technology AX1 LED User Manual

AX1 LED User Manual
6.3

SYSTEM ALERT TO USER THROUGH TELEPHONE

In case of any intrusion or emergency, this system will acknowledge users with an alarm
report. The panel will contact the user through fixed telephone or mobile line. If the user is
unable to reply the phone call, this system will call the user again. The default dialing
attempts are 5 times. After 30 minutes, the system will call again. The number of repetition
calls after 30 minutes depend on the redial attempt set in the installer programming. The
reporting comes in two reporting method – no voice or beeper reporting and voice
reporting (if voice module is installed).
System will report the status of the system to user when an event happened accordingly to the
list below:
Reporting / Zone indication
Zone xx Violated
Zone xx Restored
Emergency
Fire
Panic
Help
AC Loss
AC Restore
Trouble
Zone Bypass
Zone Bypass Restore
Tamper
System Armed
System Disarmed
Description
Zone has been violated
Alarm in zone xx has been restored
Emergency occurring
Fire occurring
Panic occurring
Duress Code has been entered
AC loss
AC restored
Trouble due to battery problem and bell problem
Zone has been bypassed
Zone has been unbypassed
Tamper occurring
System has been armed
System has been disarmed
Rev 1.0
28