AX1 LED User Manual
1.1
ARM/DISARM USING TELEPHONE
The AX1 alarm system is designed with the feature which allow system control by using
telephone, there are two methods. Firstly is using
the system and secondly is guided by
1.1.1 ARM/DISARM WITH VOICE ACTIVE
Incorrect code!
Please enter your code
You are not an
authorized user. System
will now exit.
Thank you
If wrong input key
Invalid Input
If arming accepted,
keypad shows:
.
beeper
Welcome
Please enter your code.
Invalid Code
Only 3 attempts
allowed.
System hangs up
System hangs up
if voice module is installed into
voice guided
Press [Master PIN] [ # ] within 1 minute
Correct Code
Main Menu
Press
1 for Security Menu
2 for Automation Menu
Press [0]
0 to Exit
Security Menu
Press
1 to ARM
2 to DISARM
Press [0]
# for Main Menu
0 to Exit
Arming Menu
Press
1 to arm Partition 1
# for Main Menu
0 to Exit
* AX1 LED only support
Press [0]
partition 1
Arming Mode Menu
Press
1 for Auto Home Arming
2 for Night Arming
3 for Day Arming
4 for Away Arming
5 for Force Arming
# for Main Menu
0 to Exit
Press [0]
Arming accepted.
Press
Press [0]
# for Main Menu
0 to Exit
Rev 1.0
Press [1]
Press [#]
Press [1]
Press [#]
Press [1]
Press [#]
Press [1] to [5]
Press [#]
11