Phone Line Loss Detection - O.Y.L. Technology AX1 LED User Manual

AX1 LED User Manual

4.0.9 PHONE LINE LOSS DETECTION

Command
Step 1: Press [10] [#]
Step 2: Press key [1] to toggle the ON/OFF
(Enable/disable) of Phone Line Loss
Detection
Step 3: Press [#]
Note:
Initially phone line loss detection will be toggling OFF (Disable).
When phone line loss detection enable and phone communication option enable in installer
programming, alarm will be trigger if phone line cut off.
Indication Light ON means features ENABLED, OFF means DISABLED.
Information
 Zone 1 light will be ON to indicate that the
command has been accepted and the users are in
"Phone Line Loss Detection" option.
 Zone light 1 will toggle ON/OFF according to
Phone Line Loss Detection setting status.
 Keypad will beep twice for valid entry
Rev 1.0
25