AX1 LED User Manual
4.0.5.3 ARM
Command
Step 1: Press [6] [#]
Step 2: Enter the Auto Arm Time:
[ _ ] [ _ ] [ _ ] [ _ ] [#]
4.0.5.4 DISARM
Command
Step 1: Press [7] [#]
Step 2: Enter the Auto DisarmTime:
[ _ ] [ _ ] [ _ ] [ _ ] [#]
4.0.6 CLOCK
Command
Step 1: Press [5] [#]
Step 2: Edit Real Time Clcok:
[ _ ] [ _ ] [ _ ] [ _ ] [#]
Information
Zone 1 light will be ON to indicate that the
command has been accepted and the users are in
"Edit Auto Arm Timer" option.
Please enter international time according to the
24-hour format.
E.g. "1400" for 2pm
Zone light will be ON one by one to indicate that
the time has been entered.
Enter "0" will delete the Auto Arm Timer.
The keypad will beep twice for valid entry.
Information
Zone 1 light will be ON to indicate that the
command has been accepted and the users are in
"Edit Auto Disarm Timer" option.
Please enter international time according to the
24-hour format.
E.g. "1400" for 2pm
Zone light will be ON one by one to indicate that
the time has been entered.
Enter "0" will delete the Auto Disarm Timer.
The keypad will beep twice for valid entry.
Information
Zone 1 light will be ON to indicate that the
command has been accepted and the users are in
"Edit Real Time Clock" option.
Please enter international time according to the
24-hour format.
E.g. "1400" for 2pm
Zone light will be ON one by one to indicate that
the real time clock has been entered.
The keypad will beep twice for valid entry.
Rev 1.0
23