AX1 LED User Manual
In order to access the keypad setting, the system must be in normal mode.
Command
Door Chime
Press
and hold for 2 sec
Keypad Back Light
Press [COM] [2] [1] [#]
Arm Tone
Press [COM] [2] [2] [#]
Pre-warn Tone
Press [COM] [2] [3] [#]
Key press Tone
Press [COM] [2] [4] [#]
Toggle ON/OFF for all
keypads setting
Press [COM] [2] [5] [#]
Note:
Initially keypad setting will be all toggling ON (Enable).
Keypad will beep twice for valid entry.
CHAPTER 5: KEYPAD SETTINGS
Information
This options will toggle the door chime to ON/OFF
This options will toggle the keypad back light to ON/OFF
This options will toggle the arm tone to ON/OFF
This options will toggle the pre-warn tone to ON/OFF
This options will toggle the key press tone to ON/OFF
This option will toggle all keypad settings all at one time.
Under this command, all keypad settings ( Door Chime,
Back light, Arm Tone, Pre-warn Tone, Key press Tone) will
act as a "group" to ON/OFF.
Rev 1.0
26