Setup / Assembly; Water Pump Preparation - MK Diamond Products MK-2000 Owner's Manual, Operating Instruction

MK-2000 ELECTRIC SAW
ADJUSTABLE CUTTING GUIDE INSTALLATION
NOTE: The adjustable Cutting Guide can be used on either side of the Diamond Blade.
(A)
Loosen adjustable Cutting Guide
retaining thumbscrews by turning
counter-clockwise.

WATER PUMP PREPARATION

Turn clockwise
to tighten
Discharge Fitting
(A)
Thread the Water Pump Discharge Fit-
ting onto the Water Pump Discharge
(B)
Position adjustable Cutting Guide
above movable Cutting Table. Align
parallel slots. Seat and tighten the
adjustable Cutting Guide retaining
thumbscrew.
(B)
Press one end of the Cooling Transfer
Tube into the Water Pump Discharge
Fitting
17
SETUP & ASSEMBLY
(C)
Slide Cooling Flow Adjusting Clamp
onto the Cooling Transfer Tube