Setup / Assembly; Water Pump Preparation - MK Diamond Products MK-2000 Series Owner's Manual

MK-2000 ELECTRIC SAW
ADJUSTABLE CUTTING GUIDE INSTALLATION
NOTE: The adjustable Cutting Guide can be used on either side of the Diamond Blade.
(A)
Loosen adjustable Cutting Guide
retaining thumbscrews by turning
counter-clockwise.

WATER PUMP PREPARATION

(A)
Install Water Pump
Discharge Fitting.
(B)
Position adjustable Cutting Guide
above movable Cutting Table. Align
parallel slots. Seat and tighten the
adjustable Cutting Guide retaining
thumbscrew.
(B)
Press one end of the Cooling
Transfer Tube into the Water
Pump Discharge Fitting.
19
SETUP & ASSEMBLY