Locking A Conference Call; Raising/Lowering Hands In A Conference Call; Scheduling A Meet-Me Conference - Cisco 7960 User Manual

Meet-Me Conference

Locking a Conference Call

Raising/Lowering Hands in a Conference Call

Scheduling a Meet-Me Conference

52 System Telephone Features
Once Mute is enabled (before or during the conference call), anyone joining the
active conference will be muted as soon as they are connected to the conference
call. Callers joining the conference when mute is in effect hear an announcement
that the conference is muted after the announcement that the conference is active.
Members of the conference will hear the join tone and the caller's name.
Locking a meet-me conference prevents additional callers from joining the
conference. Unlocking the conference allows additional callers to join the
conference.
The Lock function is toggled from the keypad by pressing *4 to enable or disable
the lock function.
When the moderator locksor unlocks a conference, only the moderator will hear an
announcement that the conference has been locked or unlocked.
Callers who try to join the conference when it is locked hear an announcement that
the conference is locked and they should contact the moderator for assistance.
NOTE: The moderator must be using the Meet-Me Moderator Floor Control application in
the Web Portal to see and acknowledge raised hands.
If you are a member of a meet-me conference you can ask to be recognized or
respond to a moderator's question by raising and lowering your hand - in a virtual
manner.
•
Press #8 to raise your hand
•
Press #9 to lower your hand
Raising your hand can be used to ask for permission to speak when the conference
has been muted. It can also be used if the moderator wants to poll partiticpants and
asks for a show of hands. Both guest participants and the moderator can raise/
lower their hands using these coeds.
Scheduling a conference call is done by dialing the correct number and entering
the date, time and length of the conference and number of conference members.
1. If dialing internally, dial the Meet-Me Schedule number (default is 523).
Otherwise, dial the ten-digit conference access number.
You may need to press the Dial softkey to complete dialing.
Cisco 7960/7940 Telephone User Guide
620-05600070B