Adjusting The Volume; Adjusting The Ringer Volume; Answering A Call; Using The Phone - Cisco 7960 User Manual

Adjusting the Volume

Adjusting the Volume

Adjusting the Ringer Volume

Answering a Call

...using the Phone

Answering a Second Call (Call Waiting)

8 Basic Phone Features
•
On the 7960 MGCP, press the Back soft key.
•
On the 7960 SCCP, press the Exit soft key.
•
Once if your phone does not have an expansion module.
•
Twice if your phone has an expansion module.
1. Activate the handset, headset, or speakerphone.
2. Press and release the VOLUME (arrow up and down) keys to adjust the
volume as desired. You hear a tone and a horizontal scale displays on the
phone to indicate the volume level.
3. To save the volume setting for future calls:
•
On the 7960 MGCP, press the Save soft key.
•
On the 7960 SIP, hang up. The new setting is saved automatically.
To adjust the ringer volume press the volume (arrow up and down) buttons while
the phone is on hook to adjust the ringer volume as desired. The ringer sounds and
a bar graph displays on the phone to indicate the volume level. The new setting is
saved automatically.
When you hear your phone ring and see the red light flash on your handset, answer
in any of the following ways:
•
Lift the handset.
•
Press the line button to turn on the speakerphone.
•
Press the SPEAKER button to turn on the speakerphone.
•
Press the Answer soft key.
•
Press the HEADSET button to use the headset.
The easiest way to answer a call when you are already speaking on a call is by
using the Answer soft key.
Cisco 7960/7940 Telephone User Guide
620-05600070B