Cisco 7960 User Manual page 156

Using TAPI to Call from Outlook
144 Set Up Outlook for TAPI
4. Click Call Contact on the menu (circled in the previous screen) to open the
New Call dialog box.
5. Click Start Call to dial the telephone number displayed in the Number field.
NOTE: You cannot call four-digit extensions from Outlook. A complete 7- or 10-digit
phone number must be used.
TIP: Always check to be sure you have the correct number selected before
starting a call. If you have multiple phone numbers entered for the person
you are calling, you must use the drop-down list to select the number to call.
6. The speaker on your telephone should be activated and you should hear
ringing or a busy signal as the call is connected to the dialed number.
Cisco 7960/7940 Telephone User Guide
620-05600070B