Secondary Setup Menu (Setup>More); Table 6-5: Secondary Setup Mode Features And Functions - Teledyne T802 Operation Manual

Basic Operation
4.4.2. SECONDARY SETUP MENU (SETUP>MORE)

Table 6-5: Secondary Setup Mode Features and Functions

MODE OR FEATURE
External Communication
Channel Configuration
System Status Variables
System Diagnostic Features
and
Analog Output Configuration
1
Alarm Limit Configuration
1
Alarm warnings only present when optional concentration alarm relay package is installed.
68
Teledyne API T802 Paramagnetic O
MENU
ITEM
Used to set up and operate the analyzer's various external I/O
COM channels including RS-232, RS-485, modem communication
and/or Ethernet access.
Used to view various variables related to the instruments current
operational status
 Changes made to any variable will not be recorded in the
VARS
instrument's memory until the ENTR key is pressed.
 Pressing the EXIT key ignores the new setting.
Used to access a variety of functions that configure, test or
diagnose problems with a variety of the analyzer's basic
DIAG systems.
Most notably, the menus to configure the output signals
generated by the instruments Analog outputs, are located here.
Used to turn the instrument's two alarms on and off as well as
ALRM
set the trigger limits for each.
Analyzer Operation Manual
2
DESCRIPTION
MANUAL
SECTION
5.7
5.8
5.9
5.10
07275B DCN6418