Technical Assistance - Teledyne T802 Operation Manual

Troubleshooting and Service
QUESTION
How do I perform a leak check? See Section 10.3.3.
How do I measure the sample
flow?
What is the averaging time for
this instrument?

11.9. TECHNICAL ASSISTANCE

218
Teledyne API T802 Paramagnetic O
Sample flow is measured by attaching a calibrated rotameter, wet
test meter, or other flow-measuring device to the sample inlet port
when the instrument is operating. The sample flow should be 120
3
/min 10%. See Section
cm
The default averaging time, optimized for ambient pollution
monitoring, is 60 seconds for stable concentrations and 10 seconds
for rapidly changing concentrations; See 12.5.9 for more information.
If this manual and its troubleshooting / service sections do not solve your
problems, technical assistance may be obtained from:
Teledyne API, Technical Support,
9480 Carroll Park Drive
San Diego, California 92121-5201USA
Before you contact Teledyne API's Technical Support, fill out the problem report
form in Appendix C, which is also available online for electronic submission at
http://www.teledyne-api.com/forms/
ANSWER
9.4.2.
Phone: 800-324-5190 (toll free in North America)
Phone: 858-657-9800 (direct)
Fax: 858-657-9816
Email: sda_techsupport@teledyne.com
Website: http://www.teledyne-api.com/
Analyzer Operation Manual
2
07275B DCN6418