Using The Second Feed Roll - ENCAD 212528-05 Quick Start Manual

NovaJet 500/630/700 Series Printer Quick Start Guide
Note: The NovaJet 505 does not have the takeup roller as shown in the preced-
ing illustration The 505 has clips on the platen that are designed to hold media in
place while printing. Slide the left clip to adjust for different media sizes. The
clips were specifically designed for bond media and may not be useful with other
medias. If you don't need the clips, they will slide to the side away from the
media.

Using the second feed roll

The second feed roll option is not available to you if you didn't order the optional
takeup and dryer system. The optional takeup roll can also be used as a feed
roll. If you use the optional takeup roll as a feed roll, you cannot use the takeup
system. If you want to use the optional takeup roll as a feed roll, set the printer to
ROLL2 by pressing Setup Menu/Paper Options Menu/Supply Type/Roll2.
Follow the loading instructions in the previous section using the bottom roll.
Caution: When using the ROLL2 option, the media has a tendency to curl inward
under the bottom roller. This could block the media sensor and prevent the reed
roller from feeding media. Make sure you keep the media turned outward, away
from the media sensor.
16
Left Side View
Media presence
sensor
Feed
Roll2
Loading Roll Media Using Roll2
Media sensors for
feed and take up