Table of Contents
Advertisement
Color calibration aligns the inkjets of the cartridges to each other. Misalignment
can result from small tolerance variations in cartridges during manufacturing and
from cartridge alignment in the printer. Color test patterns let you check the
horizontal and vertical alignment values and adjust them for the best printing
results. A loupe is provided in the accessory box to help you check the prints.
You should perform Color Deadband Compensation before performing Color
Calibration. Perform Color Deadband Calibration and Color Calibration each
time a cartridge is replaced with a different cartridge. If you remove and
reinstall the same cartridge, only Color Calibration needs to be performed.
➪ ➪ ➪ ➪ ➪
To perform color deadband compensation on 630/700 series
printers
1
With paper loaded, press Utility Menu/Calibration Menu/Color DB
Test.
The test patterns print as shown below.
Y
M
C
K
2
For each color, examine the vertical lines and select the straightest
lines. Note the compensation number at the bottom of the lines you
selected.
3
Existing compensation values are printed in the lower right corner of
the test pattern. If any of these differ from the values you selected,
enter new compensation values by pressing the button for the color
deadband you want to change. Then use the Next and Previous
option buttons to scroll to the desired compensation. Note: You
may select a value in between the listed values.
➪ ➪ ➪ ➪ ➪
To perform color calibration
1
With paper loaded, press Utility Menu/Color Calibration Menu/
Calib Print Test.
NovaJet 500/630/700 Series Printer Quick Start Guide
7
6
5
4
39
Hide quick links:
Advertisement
Table of Contents
