ENCAD 212528-05 Quick Start Manual page 29

5 Remove the cartridge from the carriage and remove the blue tape
from the jet area of the cartridge. CAUTION! Do not tilt the
cartridge up higher than a 30 degree angle. This could cause
the cartridge to lose pressure.
6 Rotate the cartridge one complete revolution counterclockwise to
ensure that there are no twists in the ink delivery line.
Check for ink on the jet plate. Continuous bleeding of the jet plate
indicates a loss of vacuum in the cartridge or an air leak in the lines.
A small amount of ink can be cleaned off the jet plate by dabbing with
a moist, lint-free cloth.
7 Insert the cartridge into the carriage.
8 Repeat with each cartridge.
9 Press Utility Menu/Access Cartridge to return the carriage to the
service station.
10 Print the color test, prime test pattern and paper axis test as
described later in this guide.
NovaJet 500/630/700 Series Printer Quick Start Guide
29