Table of Contents
Advertisement
Foot
Stand Leg
Attach Connectors
Stand Leg to Printer Head
(Not Required on NovaJet 736)
5
Two persons are required to lift the printer. Remove the assembled
printer and stand from the box. Save the boxes and packing
materials in case you need to ship the printer.
6
Check to be sure that the media sensor is plugged in to the
connector on the right stand leg.
7
On the NovaJet 736, attache the left and right roll
guides to the back of the printer as shown. Turn
th thumbscrew (blue knob) to secure them in
position.
The NovaJet 505 and 736 does not include a takeup and
dryer system. Proceed to the section on Removing protec-
tive shipping material. For all other printers, continue with
the following sections to install the dryer system.
NovaJet 500/630/700 Series Printer Quick Start Guide
7
Hide quick links:
Advertisement
Table of Contents
