NovaJet 500/630/700 Series Printer Quick Start Guide
➪ ➪ ➪ ➪ ➪
To install needle assemblies and prime ink delivery lines
1
Close the ink delivery lines by pushing the valve up.
2
Insert the needle assembly connector into the fitting on the carriage.
There are two connectors for each cartridge - one is blue and the
other is gray. Be sure that the needle assembly is plugged into the
same color connector as the ink reservoir.
3
Open the ink delivery lines by pushing the valve down.
4
Insert the needle into the small hole on the ink primer.
32