Installing Needle Assemblies And Priming The Novajet 736 Or 750 Ink Delivery Lines - ENCAD 212528-05 Quick Start Manual

Installing needle assemblies and priming the NovaJet 736 or
750 ink delivery lines
After filling the ink reservoirs, you will need to install needle assemblies and
prime each of the ink delivery lines to establish ink flow through the lines and ink
cartridges using the ink primer. Be sure it has batteries in it before continuing.
(Refer to the Reference Guide on the System CD for information on installing
batteries.)
Your printer is equipped with shutoff valves for the ink delivery lines on the
carriage. When the valve is pushed to the upright position, the ink delivery lines
are closed at the carriage. This maintains negative pressure while installing and
priming the ink delivery lines.
Note: When filling more than one color of ink, be sure to thoroughly wipe any
excess ink from the ink primer before working with the next color to avoid the
possibility of contamination.
NovaJet 500/630/700 Series Printer Quick Start Guide
Switch
Sight
Tube
31