Table of Contents
Advertisement
NovaJet 500/630/700 Series Printer Quick Start Guide
In addition to cartridge recognition, the printer automatically performs tests on the
cartridges and uses the information to improve image quality, monitor cartridge
life, and update the user with system status. Some tests are performed between
prints and require no user input, while others require user input.
Cartridge-related error messages are listed in Appendix E of the Reference
Guide on the system CD-ROM.
To clear a cartridge-related error, press Utility Menu/Access Cartridge to
move the carriage to the position which allows replacement of the ink cartridges.
Check to make sure you have the proper cartridges installed in each position, that
they all contain the same type of ink (i.e. GX, GS Plus, or GO) and all cartridges
are installed properly. Install new cartridges if necessary.
➪ ➪ ➪ ➪ ➪
To clear cartridge recognition error:
1
Press Utility Menu/Access Cartridge to move the carriage to the
position which allows replacement of the ink cartridges.
2
Verify that four valid cartridges are installed. Replace any invalid
cartridges.
3
Press OK. If the problem has been corrected, the printer will
proceed with the print request. If the problem has not been
corrected, the printer will beep.
Pausing the printer
To pause the printer while printing, press the Pause button. Press it again to
resume printing.
Canceling a print
To cancel a print, first send a cancel order from the computer using the appropri-
ate command for your software application. For example, you can delete the file
in the Print Manager/Print Options. To clear the buffer after cancelling a print,
press Reset on the Main menu.
Registering your printer
Once you have installed your printer, go to www.encad.com to register your
printer and activate your warranty coverage.
42
Hide quick links:
Advertisement
Table of Contents
