ENCAD 212528-05 Quick Start Manual page 34

NovaJet 500/630/700 Series Printer Quick Start Guide
Check for ink on the jet plate. Continuous bleeding of the jet plate
indicates a loss of vacuum in the cartridge or an air leak in the lines.
A small amount of ink can be cleaned off the jet plate by dabbing with
a moist, lint-free cloth.
10 Insert the cartridge into the carriage.
11 Repeat for each cartridge.
12 Press Utility Menu/Access Cartridge to return the carriage to the
service station.
13 Print the color test, prime test pattern and paper axis test as
described later in this guide.
14 If all colors look fine, go on to step 18. If any color drops out, prime
cartridges as necessary, using the ink primer. Place the suction end
of the ink primer over the jet area of the cartridge.
34
Switch
Sight
Tube