Clogged Jets - ENCAD 212528-05 Quick Start Manual

A solid bar indicates an
electrically defective
jet. Jet Compensation
will automatically
compensate for that
jet.

Clogged jets

Clogged jets cannot be automatically detected and therefore must be cleared
manually. If a jet is clogged, it will appear in the prime pattern as a gap in the
sloping line for each cartridge.
To clear a clogged jet, clean and prime the affected cartridge according to the
Maintenance Guide on your system CD-ROM. Your goal is to eliminate all gaps
in the "stair step" pattern before starting your job.
➪ ➪ ➪ ➪ ➪
To print the manual jet compensation list:
1 From the main menu, select Utility Menu/Calibration Menu/Open
Jet Menu/Print Jet List.
NovaJet 500/630/700 Series Printer Quick Start Guide
A missing line or "gap",
misdirected line, or a
light-printing line
indicates a clogged jet.
Y: 3, 4, 6, 8, M: 3, 4, 6, 8,
The CMYK header lets you
know the availableprint
modes that will provide
compensation.
C: -, 4, -, - K: -, 4, 6, 8
37