Using The Second Feed Roll; Using The Takeup Roll - ENCAD 215360-01 Quick Start Manual

Using the second feed roll

The takeup roll can also be used as a feed roll. If you use the takeup roll as a
feed roll, you cannot use the takeup system. If you want to use the takeup roll
as a feed roll, set the printer to ROLL2 by pressing Setup Menu/Paper
Options Menu/Supply Type/Roll2. Follow the loading instructions in the
previous section using the bottom roll.
Media presence
Caution: When using the ROLL2 option, the media has a tendency to curl
inward under the bottom roller. This could block the media sensor and prevent
the reed roller from feeding media. Make sure you keep the media turned
outward, away from the media sensor.

Using the takeup roll

The takeup roll allows unattended printing by automatically winding printed
media onto a core. In this mode, the automatic cutter is disabled. When using
this option, be sure that the media sensor on the printer's right leg is not blocked.
Depending on the ambient humidity, temperature, and amount of ink coverage,
you may want to turn on the dryer and/or set a dry time as described in the
Reference Guide on the System CD-ROM.
NovaJet 800 Series Printer Quick Start Guide
Left Side View
sensor
Feed
Roll2
Loading Roll Media Using Roll2
Dryer
Media sensors for
feed and take up
23