Adjustments; Tiller Angle Adjustment (Fig. 6A&B); Seat Slide & Swivel Adjustment (Fig. 7); Seat Removal (Fig. 7) - Shoprider Mobility Owner's Manual

Tiller Angle Adjustment (Fig. 6A&B)
On the left hand side at the base of the tiller is a red
lever/black knob. Push/pull the lever to release the pin and
select the required tiller angle. Refit the pin into one of the
five location holes. Check the tiller is locked in place before
driving the scooter.
Seat Slide & Swivel Adjustment (Fig. 7)
Pulling up on the seat slide lever allows the seat position to
be adjusted forward or backward. Release the lever and
the seat will lock in that position. Under the right side of the
seat there is a spring loaded red lever. Pulling up on the
lever allows the seat to swivel, when released the seat will
lock into one of 4 positions. (Straight, 90', 180, 270)

Seat Removal (Fig. 7)

Fold down the back of the seat. Pull up the swivel seat
adjustment lever (fig. 7) and lift seat off. Remove the hand-
knob and locking pin that secures the seat adaptor. Lift the
seat adaptor out of the seat post.

Seat Height Adjustment (Fig. 8)

Remove seat as described above. Loosen the seat
tightening hand knob/Allen key head bolt. The seat height
can be adjusted to 5 different settings by inserting the steel
locking pin in the required hole. Retighten the hand
knob/Allen key head bolt and replace the seat.
Do not use the scooter without the arms
being fitted.

Adjustments

Adjustment Lever
Adjustment Lever
Adjustment Lever
Seat Adaptor
Seat Tightening
10
Tiller Angle
Figure 6A
Figure 6B
Seat Slide
Swivel Seat
Figure 7
Seat Spring
Locking Pin
Hand Knob
Figure 8
Tiller Angle
Adjustment Lever