Speaker Assembly - HP Pavilion 15 Sleekbook Maintenance And Service Manual

Reverse this procedure to install the cooling fan in the base enclosure.

Speaker assembly

Description
Speaker assembly
IMPORTANT:
and replacement.
Before removing the speaker assembly, follow these steps:
1. Shut down the computer.
2. Disconnect all external devices connected to the computer.
Disconnect the power from the computer by first unplugging the power cord from the AC outlet
3.
and then unplugging the AC adapter from the computer.
4. Remove the battery (see
Remove the keyboard (see
5.
6. Remove the top cover (see
7. Remove the hard drive (see
Remove the USB board (see
8.
9. Remove the WLAN (see
10. Remove the system board (see
Remove the speaker assembly:
NOTE: The speaker screws were removed during the process to remove the top cover.
Make special note of each screw and screw lock size and location during removal
Battery on page
Keyboard on page
Top cover on page
Hard drive on page
USB board/Audio jack on page
WLAN module on page
System board on page
42).
47).
51).
56).
59).
60).
63).
Component replacement procedures
Spare part number
701690-001
81