Power Connector - HP Pavilion 15 Sleekbook Maintenance And Service Manual

4. If it is necessary to replace the wireless antenna cables and transceivers:
a.
Release the wireless antenna cables from the clips (1) built into the display enclosure.
b.
Release the wireless antenna transceivers (2) from the display enclosure. (The wireless
antenna transceivers are attached to the display enclosure with double-sided tape.)
c. Remove the wireless antenna cables and transceivers.
Reverse this procedure to reassemble and install the display assembly.

Power connector

Description
Power connector
IMPORTANT:
and replacement.
Before removing the power connector, follow these steps:
1. Shut down the computer.
2. Disconnect all external devices connected to the computer.
3. Disconnect the power from the computer by first unplugging the power cord from the AC outlet
and then unplugging the AC adapter from the computer.
Remove the battery (see
4.
5. Remove the keyboard (see
6. Remove the top cover (see
7. Remove the hard drive (see
Remove the USB board (see
8.
9. Remove the WLAN (see
Make special note of each screw and screw lock size and location during removal
Battery on page
Keyboard on page
Top cover on page
Hard drive on page
USB board/Audio jack on page
WLAN module on page
42).
47).
51).
56).
59).
60).
Component replacement procedures
Spare part number
701682-001
87