Table of Contents
Advertisement
Speaker assembly
Description
Speaker assembly
Before removing the speaker assembly, follow these steps:
1.
Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the
computer on, and then shut it down through the operating system.
2.
Place the computer in "Battery Safe mode"
3.
Disconnect all external devices connected to the computer.
4.
Disconnect the power from the computer by first unplugging the power cord from the AC outlet, and
then unplugging the AC adapter from the computer.
5.
Remove the following components:
a.
Service doors
b.
Hard drive
c.
Keyboard
d.
Top cover
Remove the speaker assembly:
1.
Position the top cover upside-down.
2.
Remove the 2 Phillips M2.0×6.0 screws (1) that secure the speaker assembly to the top cover.
3.
Remove the cable from the clips in the top cover (2).
50
Chapter 6 Removal and replacement procedures for Authorized Service Provider parts
(Service doors on page
(Hard drive on page
37)
(Keyboard on page
40)
(Top cover on page
44)
(Battery Safe mode on page
31).
Spare part number
L00839-001
30).
Advertisement
Table of Contents
