Excalibur AL-1850-EDPB Operation Manual page 6

Controller & Transmitter Functions (cont'd)
PAniC: Press and hold the "LOCK" or "UNLOCK" button for 3
seconds
OR
SiLEnT ARm / DiSARm: Press and release the "TRUnK" button
twice in 5 seconds
x2
SEnSOR ByPASS: Press and release the "TRUnK" button within 5
seconds of locking/arming the alarm system.
1
2
LOW VOLTAGE/TEmP AUTO START: Press and release the " "
button within 5 seconds of locking/arming the system.
1
6
• ThE SIREn/hORn WILL SOUnD, ThE PARKIng
LIghTS WILL FLASh, AnD ThE DOORS WILL LOCK OR
UnLOCK DEPEnDIng WhICh BUTTOn IS PRESSED
(1-way transmitter: press anD holD the loCk
or unloCk button for 3 seConDs)
• ThE PARKIng LIghTS WILL FLASh, AnD ThE
DOORS WILL LOCK/ARM OR UnLOCK/DISARM DE-
PEnDIng On ThE CURREnT SYSTEM STATUS
• UPOn RECEIVIng COnFIRMATIOn FROM YOUR
SYSTEM, ThE COnTROLLER WILL ShOW ThE LOCK/
ARM OR UnLOCK/DISARM ICOn
(1-way transmitter: press release the "||" but-
ton twiCe in 5 seConDs)
• ThE SYSTEM WILL gIVE OnE ChIRP TO InDICATE
ThE SEnSOR IS BYPASSED
• UPOn RECEIVIng COnFIRMATIOn FROM YOUR
SYSTEM, ThE COnTROLLER WILL ALSO ChIRP OnCE
& DISPLAY ThE SEnSOR ICOn
(1-way transmitter: press anD release the
"||" button within 5 seConDs of arming the
system)
• ThE SYSTEM WILL gIVE OnE ChIRP TO InDICATE
ThE LOW VOLT/LOW TEMP(15 DEgREE OnLY) AUTO-
START IS ACTIVATED SEE PAgE 7 FOR MORE InFO
• UPOn RECEIVIng COnFIRMATIOn, ThE COnTROL-
LER WILL ChIRP OnCE AnD ThE CLOCK WILL READ
"RS AUTO" EVERY 5 SECOnDS
(1-way transmitter: press anD release the
2
"start" button within 5 seConDs of arming the
system)
*