Using Armrest - Invacare Solara Spree GT Owner's Operator And Maintenance Manual

SECTION 7—ARMS
4. Install the quick release pin into the rear arm socket.
5. Repeat STEPS 1-4 for opposite side, if necessary.
DETAIL "A"
Locked - Down
(Vertical)
FIGURE 7.2 Removing/Installing Flip Back Armrest

Using Armrest

Make sure the armrest release lever is in the locked position before using the wheel-
chair.
NOTE: For this procedure, refer to FIGURE 7.3.
1. Unlock the flip back arms by rotating the armrest release lever forward.
2. Pull the front of the flip back arm straight up/out of the arm socket and towards the
rear of the wheelchair.
3. To use the flip back arm, push the flip-back arm towards the front of the wheelchair
and then downward into the arm socket.
4. Lock the flip back arms by rotating the armrest release lever towards the back of the
wheelchair.
DETAIL "A"
Locked - Down
(Vertical)
® ™
Solara /Spree GT
Unlocked - Up
(Horizontal)
WARNING
Unlocked - Up
(Horizontal)
FIGURE 7.3 Using Armrest
44
Unlock
(Horizontal)
Arm
Socket
Armrest
Release
Height Adjustment
Lever
Lever
Swing Back Arm
Rear
Lock (Vertical)
Arm
Socket
Front
Armrest
Release Lever
and Socket
Part No 1125027