Section 14-Contracture Footplate Option; Adjusting The Contracture Assembly; Forward Mount; Reversed Mount - Invacare Solara Spree GT Owner's Operator And Maintenance Manual

SECTION 14—CONTRACTURE FOOTPLATE OPTION
SECTION 14—CONTRACTURE
FOOTPLATE OPTION

Adjusting the Contracture Assembly

Forward Mount

NOTE: For this procedure, refer to FIGURE 14.1.
NOTE: The number of mounting positions on the contracture assembly may vary due to the width
of the wheelchair.
1. Align the mounting holes of the outer tube with the mounting holes of the insert tube
of the crossmember assembly.
2. Align the mounting holes of the
contracture footplate assembly with
two desired mounting positions of the
crossbreed assembly.
3. Secure the contracture assembly to the
crossmember assembly with the two
mounting screws, washers and
locknuts provided. Securely tighten.
4. If necessary, repeat STEPS 1-4 for the
other contracture assembly.

Reversed Mount

NOTE: For this procedure, refer to FIGURE 14.2.
1. Remove the contracture footplate. Refer to Contracture Footplate Height Adjustment
on page 89.
2. Align the mounting holes of the contracture footplate assembly with two desired
mounting positions of the crossmember assembly.
3. Secure the contracture assembly to the
crossmember assembly with two
mounting screws, washers and
locknuts provided. Securely tighten.
4. Reinstall the contracture footplate.
Refer to Contracture Footplate Height
Adjustment on page 89.
5. If necessary, repeat STEPS 1-4 for the
other contracture assembly.
® ™
Solara /Spree GT
Washers
Locknuts
Insert
Tube
Outer Tube
FIGURE 14.1 Adjusting the Contracture
Assembly - Forward Mount
Washers
Lock
Nuts
Insert Tube
Mounting Hole
FIGURE 14.2 Adjusting the Contracture
Assembly - Reversed Mount
86
Mounting Holes
Contracture
Assembly
Mounting
Screws
Outer Tube
Mounting
Screws
Contracture Assembly
Part No 1125027