Invacare Solara 3G User Manual
  1. Manuals
  2. Brands
  3. Invacare Manuals
  4. Wheelchair
  5. Solara 3G
  6. User manual

Invacare Solara 3G User Manual

Hide thumbs Also See for Solara 3G:
Table of Contents

Advertisement

Quick Links

Download this manual See also: User Manual, Quick Manual
Solara 3G/
Spree 3G
Wheelchair
User Manual
DEALER: This manual MUST be given to the user of the product.
USER: BEFORE using this product, read this manual and save for future reference.

Advertisement

Table of Contents
loading

Related Manuals for Invacare Solara 3G

Summary of Contents for Invacare Solara 3G

  • Page 1 Solara 3G/ Spree 3G Wheelchair User Manual DEALER: This manual MUST be given to the user of the product. USER: BEFORE using this product, read this manual and save for future reference.

  • Page 2: Table Of Contents

    Reaching, Leaning and Bending - Forward...................................... 24 Reaching, Bending - Backward .......................................... 25 Tipping ..................................................25 Stairways ................................................27 Transferring To and From Other Seats......................................28 SAFETY INSPECTION/TROUBLESHOOTING ..........................29 Safety Inspection Checklists ..........................................29 Troubleshooting - Mechanical ......................................... 31 Part No 1154295 Solara 3G/Spree 3G Wheelchair...
  • Page 3 Adjusting the Height of the Adjustable Height Armrests................................48 Removing/Installing and Using Flipback Armrests ..................................49 Replacing Conventional Armrest Pads......................................51 Installing/Removing T-Arms..........................................51 Adjusting The T-Arms ............................................53 Adjusting T-Arm Sockets........................................... 56 Solara 3G/Spree 3G Wheelchair Part No 1154295...
  • Page 4 Adjusting Trigger Release Cables........................................72 Adjusting Hublock Cables..........................................75 Positioning Tilt Locking Collars........................................76 13 VENT TRAY ......................................79 Adjusting the Vent Tray Height........................................79 14 WHEELS/FORKS ....................................81 Installing/Removing Rear Wheels........................................81 Adjusting The Quick-Release Axle ........................................83 Part No 1154295 Solara 3G/Spree 3G Wheelchair...
  • Page 5 Depth Adjustment .............................................102 Contracture Footplate Height Adjustment ....................................103 Contracture Assembly Width Adjustment....................................104 18 TRANSPORT READY OPTION ..............................107 About Transport Ready Packages........................................108 Compliance Information...........................................108 Specifications...............................................108 Securing the Wheelchair to the Vehicle.......................................109 Securing the Occupant .............................................113 Solara 3G/Spree 3G Wheelchair Part No 1154295...

  • Page 6: General

    Caution indicates a potentially hazardous situation which, if not avoided, may result in property damage or minor injury or both. IMPORTANT Indicates a hazardous situation that could result in damage to property if it is not avoided. Gives useful tips, recommendations and information for efficient, trouble-free use.  Solara 3G/Spree 3G Wheelchair Part No 1154295...

  • Page 7: Limited Warranty

    This warranty gives you specific legal rights and you may also have other legal rights which vary from state to state. Invacare warrants its product, except for the seat cushion (which is not warranted), to be free from defects in materials and workmanship for a period of one year from the date of purchase when purchased new and unused from Invacare or an authorized provider.

  • Page 8: Safety

    NOTICE THE INFORMATION CONTAINED IN THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. Check all parts for shipping damage and test before using. In case of damage, DO NOT use. Contact Invacare/Carrier for further instruction. Solara 3G/Spree 3G Wheelchair...
  • Page 9 As of this date, the Department of Transportation has not approved any tie-down systems for transportation of a user while in a wheelchair, in a moving vehicle of any type. It is Invacare’s position that users of wheelchairs should be transferred into appropriate seating in vehicles for transportation and use be made of the restraints made available by the auto industry.
  • Page 10 These adjustments must be performed by a qualified technician. ALWAYS make sure that the wheelchair is stable before using the tilt-in-space Solara 3G/Spree 3G Wheelchair Part No 1154295...
  • Page 11 BACK HEIGHT • SEAT DEPTH • BACK ANGLE • SEATING SYSTEM • TILT ANGLE N/A N/A • CASTER SIZE • CASTER POSITION • WHEEL SIZE • WHEEL POSITION • USER CONDITION • SEAT HEIGHT Part No 1154295 Solara 3G/Spree 3G Wheelchair...
  • Page 12 Make sure the patient is properly positioned in the wheelchair before reclining or inclining (sitting up) to maintain maximum stability and safety. Solara 3G/Spree 3G Wheelchair Part No 1154295...
  • Page 13 Pinch point may occur when returning the tilted seat to the full upright position. Make sure the hands and body of the occupant, attendants and bystanders are clear of all pinch points before returning the tilted seat to the full upright position. Part No 1154295 Solara 3G/Spree 3G Wheelchair...
  • Page 14 (detachable) parts of a wheelchair may result in injury to the user or damage to the wheelchair. DO NOT stand on the frame of the wheelchair. Anti-tippers MUST BE attached at all times. Solara 3G/Spree 3G Wheelchair Part No 1154295...
  • Page 15 ALWAYS use the handrims for self-propulsion. Inasmuch as the handrims are an option on this wheelchair (you may order with or without the handrims), Invacare strongly recommends ordering the handrims as an additional safeguard for the wheelchair user.
  • Page 16 Weight Training Invacare DOES NOT recommend the use of its wheelchairs as a weight training apparatus. Invacare wheelchairs have NOT been designed or tested as a seat for any kind of weight training. If occupant uses said wheelchair as a weight training apparatus, INVACARE SHALL NOT BE LIABLE FOR BODILY INJURY AND THE WARRANTY IS VOID.

  • Page 17: Product Labeling

    REFER TO OWNER’S MANUAL Heavy Duty SE RÉFÉRER AU MANUEL DE Spree 3G Package ONLY WARNING Detent balls should extend beyond the diameter of the axle bushing for a positive lock. Keep detent balls clean. Part No 1154295 Solara 3G/Spree 3G Wheelchair...

  • Page 18: Wheelchairs With Transport Ready Option

    3 PRODUCT LABELING Wheelchairs with Transport Ready Option Refer to attached TRANSPORT READY OPTION Instruction Card and wheelchair Owner's Manual before use. P/N 1120033 REV B - 08/05 Solara 3G/Spree 3G Wheelchair Part No 1154295...

  • Page 19: Technical Data

    * Seat-to-Floor Height + 21 inches * Seat-to-floor Height + 25 inches SHIPPING WEIGHT: 66 lbs 63 lbs ANTI-TIPPERS: Standard FOOTREST: Swing-Away Footrest (Standard) Articulating Swing-Away Footrest, elevating Swingaway Footrests, Lift Off Footrests, Contracture Footrests (Optional) Part No 1154295 Solara 3G/Spree 3G Wheelchair...
  • Page 20 BACK HEIGHT: 17-20 inches Adjustable; 20 or 24 inches Fixed WHEEL LOCKS: Push-to-Lock (Standard) or Pull-to-Lock, Footlock TILT-IN-SPACE: Dual Cable Trigger Mechanism or Foot Pedal Mechanism (Standard) - 5° to 50° of Tilt Solara 3G/Spree 3G Wheelchair Part No 1154295...
  • Page 21 Dual Cable Trigger Mechanism (Optional) 0-175° of Tilt FRAME: Steel WEIGHT LIMITATION: Solara 3G: 300 lbs (136 kg) Spree 3G: 200 lbs (91 Kgs) Solara with Heavy Duty Package: 400 lbs (182 kg)  *The seat-to-floor heights are based on pneumatic tires and pneumatic tires with flat free inserts. If wheelchair is equipped with urethane tires, subtract 1/4 inch from the measurements listed above.

  • Page 22: Safety/Handling Of Wheelchairs

    Use this information only as a “basic” guide. The techniques that are discussed on the following pages have been used successfully by many. Individual wheelchair users often develop skills to deal with daily living activities that may differ from those described in this manual. Invacare recognizes and encourages each individual to try what works best for him/her in overcoming architectural obstacles that they may encounter, however ALL WARNINGS and CAUTIONS given in this manual MUST be followed.
  • Page 23 This can be achieved by advancing the wheelchair and then reversing it in a straight line. The Invacare Solara 3G/ Spree 3G wheelchair should be operated by an assistant when the wheelchair is in any tilted position.

  • Page 24: Coping With Everyday Obstacles

    Position the casters so that they are extended away from the drive wheels and engage wheel locks. FIGURE 5.2 Reaching, Leaning and Bending - Forward Solara 3G/Spree 3G Wheelchair Part No 1154295...

  • Page 25: Reaching, Bending - Backward

    Place foot on the step tube and begin to tilt the wheelchair toward you. Apply a continuous downward motion until the balance point is achieved and the front casters clear the curb. At this point, the assistant will feel a difference in the weight distribution. Part No 1154295 Solara 3G/Spree 3G Wheelchair...
  • Page 26 This could result in injury to the occupant. FIGURE 5.5 Tipping - Curbs: Method 2 - Wheelchair without Rotate the anti-tippers so the anti-tip wheels are pointing down. Step Tube Solara 3G/Spree 3G Wheelchair Part No 1154295...

  • Page 27: Stairways

    (detachable) parts of a wheelchair may result in injury to the user or damage to the wheelchair. Extreme caution is advised when it is necessary to move an occupied wheelchair up or down the stairs. Invacare recommends that, if possible, the user be removed from the wheelchair prior to moving. Invacare recommends using two assistants and making thorough preparations.

  • Page 28: Transferring To And From Other Seats

    Shift body weight into seat with transfer. During independent transfer, little or no seat  platform will be beneath you. Use a transfer board if at all possible. FIGURE 5.6 Transferring To and From Other Seats. Solara 3G/Spree 3G Wheelchair Part No 1154295...

  • Page 29: Safety Inspection/Troubleshooting

    Ensure sealed bearings and axle nut tension are correct. ❑ Adjust bearing system if wheel wobbles noticeably or binds to a stop. ❑ Ensure wheel/fork assembly has proper tension when caster is spun. Caster should come to a gradual stop. Part No 1154295 Solara 3G/Spree 3G Wheelchair...
  • Page 30 Inspect tilt slides and roller bearings to ensure they are free from dirt, lint, etc. ❑ Inspect seat positioning strap for any signs of wear. Ensure buckle latches. Verify hardware that attaches strap to frame is secure and undamaged. Replace if necessary. Solara 3G/Spree 3G Wheelchair Part No 1154295...

  • Page 31: Troubleshooting - Mechanical

    Check that all labels are present and legible. Replace if necessary. Troubleshooting - Mechanical SOLUTIONS If pneumatic tires, check for correct and equal pressure. Check for loose stem nuts/bolts. Check that casters contact ground at the same time. Part No 1154295 Solara 3G/Spree 3G Wheelchair...

  • Page 32: Transporting

    Remove the stroller handle (if applicable). Refer to Installing/Removing Non-Adjustable Stroller Handles on page 68. Pick up on the back release levers and push the back towards the front of the wheelchair. Refer to Folding/Unfolding the Back Assembly on page 64. Solara 3G/Spree 3G Wheelchair Part No 1154295...

  • Page 33: Maintenance

    The recommended tire pressure is listed on the side wall of the tire. Replacement of a pneumatic tire or tube MUST be performed by a qualified technician. Part No 1154295 Solara 3G/Spree 3G Wheelchair...
  • Page 34 10. Periodically check front caster wheel bearings to make sure they are clean and free from moisture. Use a Teflon lubricant if necessary. 11. Check upholstery for sagging, rips or tears. 12. Recliners Only - Periodically check gas cylinders for oil leaks. If oil leak is detected, contact Invacare. Solara 3G/Spree 3G Wheelchair...

  • Page 35: Front Riggings

    Lift the footrest assembly out of the mounting pin of the wheelchair frame. Repeat STEPS 1-2 for opposite side, if necessary.  Only the swing away footrest is shown. The lift off footrest assembly and elevating legrest install/remove in the same manner. Part No 1154295 Solara 3G/Spree 3G Wheelchair...

  • Page 36: Adjusting Footrest Height

    Remove the hex screw and coved spacer and slide the footrest up or down on its mounting tube until the desired footrest height is achieved. Reassemble the hex screw and coved spacer through the footrest upper support and mounting tube. Solara 3G/Spree 3G Wheelchair Part No 1154295...
  • Page 37 DO NOT overtighten socket bolt and locknut. Footrest MUST be able to rotate upward from the horizontal to the vertical position. Secure the footplate to the footrest support with the coved washer and locknut. Part No 1154295 Solara 3G/Spree 3G Wheelchair...

  • Page 38: Installing Adjustable Angle Flip-Up Footplate Hinge

    Check the up and down motion of the footplate hinge to make sure the user of the wheelchair can operate the footplates easily. If the footplate's motion is: • too tight, loosen the socket screw and locknut approximately turn. • too loose, tighten the socket screw and locknut approximately turn. Solara 3G/Spree 3G Wheelchair Part No 1154295...

  • Page 39: Adjusting Adjustable Angle Flip-Up Footplates

    Observe the angle of the footplate for reinstallation. Move the footplate to one of four mounting positions.  If desired depth is still not obtained, rotate the half clamp on the footplate hinge 180°. Part No 1154295 Solara 3G/Spree 3G Wheelchair...

  • Page 40: Angle Adjustment

    Screw in or out until the adjustable angle flip-up footplate is perpendicular to the footrest assembly or the desired inversion/eversion is obtained. 90° Footrest Support Flat Screws Footrest Support Footplate Detail “A” - Side Footplate View of Footplate and Footplate Footrest Support Half Clamp Hinge Adjustment Screw Locknuts FIGURE 5 Adjusting Adjustable Angle Flip-Up Footplates Solara 3G/Spree 3G Wheelchair Part No 1154295...

  • Page 41: Raising/Lowering The Elevating Legrest

    Lowering: Lift elevating legrest assembly up with one hand. While supporting the elevating legrest assembly (and user’s leg), pull release lever up with other hand and lower legrest assembly to desired height. Elevating Legrest Assembly FIGURE 6 Raising/Lowering the Elevating Legrest Part No 1154295 Solara 3G/Spree 3G Wheelchair...

  • Page 42: Adjusting Footplate Height And Calfpad Height/Depth

    Using the mounting screw spacer and locknut, secure the calfpad to Footplate the calfpad bracket. FIGURE 7 Adjusting Footplate Height and Calfpad If necessary, repeat STEPS 1-3 to adjust remaining calfpad assembly. Height/Depth Solara 3G/Spree 3G Wheelchair Part No 1154295...

  • Page 43: Composite/Articulating Footplate Heel Loop Replacement

    Locknut Replace heel loop. Footplate Reverse the disassembly procedures. FIGURE 8 Composite/Articulating Footplate Heel  When securing the heel loop to the footrest Loop Replacement assembly, tighten phillips screw until the spacer is secure. Part No 1154295 Solara 3G/Spree 3G Wheelchair...

  • Page 44: Replacing Bolt On Sector Block

    Secure the new sector block to the front rigging support tube with Mounting Mounting Washer the existing mounting screws and washers. Tighten securely. Screw Screw Washer Locking Pin Sector Block FIGURE 10 Replacing Clamp on Sector Block Solara 3G/Spree 3G Wheelchair Part No 1154295...

  • Page 45: Installing Impact Guards/Calf Strap/H-Calf Strap

    Secure the impact guards to the footrest frame. Secure the calf strap around the footrest frame (with the impact guards attached). Impact Guard H-Calf Strap Calf Strap FIGURE 11 Installing Impact Guards/Calf Strap/H-Calf Strap Part No 1154295 Solara 3G/Spree 3G Wheelchair...

  • Page 46: Arms

    Unlock armrest assembly by flipping the arm assembly release lever located on the side rail to the up (horizontal) position (Detail "A"). Pull up on the armrest assembly to remove the armrest from the arm socket. Repeat STEPS 1-2 for opposite side of wheelchair, if necessary. Solara 3G/Spree 3G Wheelchair Part No 1154295...
  • Page 47 10 ARMS DETAIL "A" Armrest Assembly Unlocked - Up Locked - Down (Horizontal) (Vertical) Arm Socket Armrest Release Lever FIGURE 1 Installing/Removing Dual Point Armrests (Fixed And Adjustable Height) Part No 1154295 Solara 3G/Spree 3G Wheelchair...

  • Page 48: Adjusting The Height Of The Adjustable Height Armrests

    Pull up on the armrest assembly to ensure the armrest is locked in place. Repeat STEPS 1-4 for opposite side of wheelchair, if necessary. DETAIL "A" Unlocked - Up Locked - Down (Horizontal) (Vertical) Armrest Release Lever FIGURE 2 Adjusting the Height of the Adjustable Height Armrests Solara 3G/Spree 3G Wheelchair Part No 1154295...

  • Page 49: Removing/Installing And Using Flipback Armrests

    Install the quick release pin into the rear arm socket. Armrest Release Repeat STEPS 1-4 for remaining flip back armrest, if necessary. Quick Release Pin Lever DETAIL "A" Unlock Locked Position Position (Horizontal) (Vertical) FIGURE 3 Removing/Installing Flip Back Armrest Part No 1154295 Solara 3G/Spree 3G Wheelchair...

  • Page 50: Using Armrest

    Flip armrest release lever to the locked (vertical) position (Detail "A"). Flip Back Armrest DETAIL "A" Flip Back Armrest Locked Position (Vertical) Front Arm Socket Unlock Position (Horizontal) Armrest Release Lever FIGURE 4 Using Armrest Solara 3G/Spree 3G Wheelchair Part No 1154295...

  • Page 51: Replacing Conventional Armrest Pads

    If the T-Arm does not slide in the T-Arm socket as desired, adjust the T-Arm socket. Refer to Adjusting T-Arm Sockets. on page 56. Adjust the T-Arm for desired height, width and depth, if necessary. Refer to Adjusting The T-Arms on page 53. Repeat STEPS 1-4 for opposite side of wheelchair. Part No 1154295 Solara 3G/Spree 3G Wheelchair...
  • Page 52 If the T-Arm does not slide in the T-Arm socket as desired, adjust the T-Arm socket. Refer to Adjusting T-Arm Sockets. on  page 56. Repeat STEP 1 for opposite side of the wheelchair. Solara 3G/Spree 3G Wheelchair Part No 1154295...

  • Page 53: Adjusting The T-Arms

    Turn the arm pad around and reposition the arm pad on the arm tube. Re-secure the arm pad to the arm tube with the two mounting screws. Tighten securely. Repeat for the opposite side, if necessary. Part No 1154295 Solara 3G/Spree 3G Wheelchair...
  • Page 54 T-Arm Adjusting T- Arm Width T-Arm Release Arm Tube Lever - UNLOCKED Position Arm Pad Mounting Mounting Screw Screw T-Arm Release Lever Set Screws - LOCKED Position FIGURE 7 Adjusting T-Arm Height/Adjusting T-Arm Width Solara 3G/Spree 3G Wheelchair Part No 1154295...
  • Page 55 Torque to 60-70 in.-lbs. Reattach the arm pad to the arm tube with the two mounting Mounting screws. Tighten securely. T-Arm Post Screw Repeat for the opposite side, if necessary. FIGURE 8 Adjusting T-Arm Depth Part No 1154295 Solara 3G/Spree 3G Wheelchair...

  • Page 56: Adjusting T-Arm Sockets

    Repeat STEPS 3-6, if necessary until the T-Arm slides in the T-Arm T-Arm Socket Locking Lever socket as desired. FIGURE 9 Adjusting T-Arm Sockets. If necessary, install rear wheels. Refer to Installing/Removing Rear Wheels on page 81. Solara 3G/Spree 3G Wheelchair Part No 1154295...

  • Page 57: Adjusting T-Arm Transfer Assists And/Or Side Guards

    Secure the side guard to the bottom clamp with the two socket Screws screws. Bottom Clamp Install the T-Arm onto the wheelchair. Refer to Installing/Removing T-Arms on page 51. FIGURE 10 Adjusting T-Arm Transfer Assists And/or Side Guards. Part No 1154295 Solara 3G/Spree 3G Wheelchair...

  • Page 58: Using/Installing/Adjusting Locking Cantilever Arms

    Securely tighten the cantilever arm to the wheelchair with two locknuts and washers. Adjust the angle of the cantilever arm, if necessary. Refer to Adjusting the Locking Cantilever Arm Angle on page 60. Solara 3G/Spree 3G Wheelchair Part No 1154295...

  • Page 59: Adjusting Locking Cantilever Arm Height

    58 to reposition the arm at the desired height. Back Cane Spacer Bottom Hex Bolt Top Hex Bolt and Coved Cantilever Washer FIGURE 12 Installing Locking Cantilever Arms. - Adjusting Locking Cantilever Arm Height.. Part No 1154295 Solara 3G/Spree 3G Wheelchair...
  • Page 60 Arm Adjustment Plate Arm Adjustment 90° 100° Plate Locknut Locking Pin Back Angle Bracket Arm Adjustment Back Angle Bracket Arm Adjustment Plate Plate Washer 120° 110° FIGURE 13 Adjusting the Locking Cantilever Arm Angle Solara 3G/Spree 3G Wheelchair Part No 1154295...

  • Page 61: Using/Installing/Adjusting Non-Locking Cantilever Arms

    Adjust the angle of the cantilever arm, if necessary. Refer to Lower Hex Adjusting Non-Locking Cantilever Arm Angle on page 62. Bolt FIGURE 14 Installing Non-Locking Cantilever Arms Adjusting Locking Cantilever Arm Height.. Part No 1154295 Solara 3G/Spree 3G Wheelchair...
  • Page 62 Tighten the mounting screw securing the cam to the cantilever arm. CAM POSITIONS Back Cane NOTE: All arm angles are relative to the back cane. 8° Arm Angle 12° Arm Angle 16° Arm Angle FIGURE 15 Adjusting Non-Locking Cantilever Arm Angle Solara 3G/Spree 3G Wheelchair Part No 1154295...

  • Page 63: Arm Pad Replacement For Cantilever Arms

    Secure with existing hardware. Full Length Arm Pads Desk Length Arm Pads Arm Pad Armrest Pad Cantilever Arm Cantilever Arm Cantilever Tube Tube Slide Tube Mounting Screws Mounting Screws FIGURE 16 Arm Pad Replacement for Cantilever Arms Part No 1154295 Solara 3G/Spree 3G Wheelchair...

  • Page 64: Back/Seat

    Unfold - Push/pull the back towards rear of wheelchair until it locks in place. • Fold - Pick up on the back release levers and push the back towards the front of the wheelchair. Release Levers FIGURE 1 Folding/Unfolding the Back Assembly Solara 3G/Spree 3G Wheelchair Part No 1154295...

  • Page 65: Adjusting The Height Of The Adjustable Height Back Canes

    (Detail “A”). Secure the inner and outer backrest mounting brackets together at the desire back angle with a mounting screw, spacer and locknut. Securely tighten. Repeat STEP 4 for the remaining back cane. Part No 1154295 Solara 3G/Spree 3G Wheelchair...
  • Page 66 DETAIL “A” - AVAILABLE BACK ANGLES Locknut 95° 105° 115° 90° 100° 110° 120° Spacer Inner Backrest Mounting Outer Backrest Mounting Bracket Screw Mounting Bracket FIGURE 3 Adjusting the Back Angle on Wheelchairs Equipped with Fixed Back Solara 3G/Spree 3G Wheelchair Part No 1154295...
  • Page 67 Plate Spacer (Not Shown) DETAIL “A” Backrest Mounting Bracket Screw 90° Backrest 100° Bracket 95° 110° 105° 120° Adjuster Spacer 115° FIGURE 4 Adjusting the Back Angle on Wheelchairs Equipped with Fold Down Back Part No 1154295 Solara 3G/Spree 3G Wheelchair...

  • Page 68: Installing/Removing Non-Adjustable Stroller Handles

    Push down on stroller handle to ensure hinge arms hold the desired position of the stroller handle. There will be an audible click.  If hinge arms do not hold the position, contact Invacare technical support Solara 3G/Spree 3G Wheelchair Part No 1154295...

  • Page 69: Installing/Replacing Seat Positioning Straps

    Remove the hex screw, locknut and seat positioning strap from the back plate of the wheelchair frame. Discard existing seat positioning strap. Install the new seat positioning strap to the wheelchair. Refer to Installing/Replacing Seat Positioning Straps on page 69. Part No 1154295 Solara 3G/Spree 3G Wheelchair...

  • Page 70: Installing/Replacing Chest Positioning Straps

    Transport ready option only - This wheelchair has been tested for seating in a motor vehicle with the factory installed seating system only. Ensure that the seating system is compatible with this wheelchair. Refer to the seating system Owner's Manual for installation and removal. Solara 3G/Spree 3G Wheelchair Part No 1154295...

  • Page 71: Tilt

    12.1 Engaging Tilt-In-Space WARNING The Invacare Solara wheelchair MUST be operated by an assistant when in ANY tilted position. ALWAYS make sure that the wheelchair is stable before using the tilt-in-space. Rear wheels may have to be repositioned rearward depending on the degree of tilt-in-space required. ALWAYS ensure stability before using maximum amount of tilt-in-space.

  • Page 72: Adjusting Trigger Release Cables

    DO NOT adjust the trigger release cables while the cables are coiled up. The adjustment will be too tight when the cable is straightened and the tilt mechanism will not lock and hold its position, possibly causing injury. Solara 3G/Spree 3G Wheelchair Part No 1154295...
  • Page 73 If necessary, repeat STEPS 1 and 2 to adjust the left trigger release lever. WARNING When cables have been rerouted due to seat depth adjustment, chair width adjustment, or seating accommodation, cables MUST be readjusted. Part No 1154295 Solara 3G/Spree 3G Wheelchair...
  • Page 74 Cable Adjusting Gear Rack Gear Assembly FIGURE 2 Adjusting Trigger Release Cables Solara 3G/Spree 3G Wheelchair Part No 1154295...

  • Page 75: Adjusting Hublock Cables

    To Loosen - Turn the cable adjusting nut counterclockwise (FIGURE 2). While holding the cable adjusting nut in place, tighten the cable locking nut against the cable adjusting nut. Cable Adjusting DETAIL “A” FIGURE 3 Adjusting Hublock Cables Part No 1154295 Solara 3G/Spree 3G Wheelchair...

  • Page 76: Positioning Tilt Locking Collars

    This procedure adjusts the degree of tilt that the wheelchair returns to for normal operation. If the amount of tilt MUST be limited. Refer to Adjusting Lower Tilt Locking Collar on page 78. Loosen the set screw that secure the tilt locking collar to the tilt slide. Solara 3G/Spree 3G Wheelchair Part No 1154295...
  • Page 77 Before tightening, ensure that the two tilt locking collars are at the same position on the tilt slide. Securely tighten the two set screws of the tilt locking collars. Bearing Housing Upper Tilt Locking Collar Set Screw Tilt Slide FIGURE 4 Adjusting Upper Tilt Locking Collar. Part No 1154295 Solara 3G/Spree 3G Wheelchair...

  • Page 78: Adjusting Lower Tilt Locking Collar

    Before tightening, ensure that the two tilt locking collars are at the same position on the tilt slide. Securely tighten the two set screws of the tilt locking collars (Detail “A”). DETAIL “A” Tilt Slide Lower Tilt Screw Locking Collar Bearing Housing FIGURE 5 Adjusting Lower Tilt Locking Collar Solara 3G/Spree 3G Wheelchair Part No 1154295...

  • Page 79: Vent Tray

    Secure the front vent tray hanger bracket to the wheelchair frame with two mounting screws and locknuts. Tighten securely. Secure the rear vent tray hanger brackets to the wheelchair frame with four mounting screws, eight washers and four locknuts. Tighten securely. Part No 1154295 Solara 3G/Spree 3G Wheelchair...
  • Page 80 Washers Washers Rear Vent Tray Hanger Bracket Height Adjustment Holes Locknuts Front Cross Tube Mounting Rear Vent Tray Mounting Screws Hanger Bracket Screws Front Vent Tray Hanger Bracket Solara 3G/Spree 3G Wheelchair Part No 1154295...

  • Page 81: Wheels/Forks

    If the locking pins do not engage or there is too much movement of the rear wheel assembly in a back and forth position. Refer to Adjusting The Quick-Release Axle on page 83. Repeat STEPS 1-3 for other rear wheel assembly. Part No 1154295 Solara 3G/Spree 3G Wheelchair...

  • Page 82: Permanent Axle

    Only 12-inch rear wheel is shown. All other wheels will install/remove in the same manner Repeat STEPS 2-3 for other rear wheel assembly. Adjust the wheel locks. Refer to Adjusting The Quick-Release Axle on page 83. Solara 3G/Spree 3G Wheelchair Part No 1154295...

  • Page 83: Adjusting The Quick-Release Axle

    Release detent pin ensuring that the locking pins are fully released. Repeat STEPS 3-5 until the quick-release axle locks properly. Wheel Hub Repeat STEPS 1-6 for opposite side, if necessary. (Reference) FIGURE 14.1 Adjusting The Quick-Release Axle Part No 1154295 Solara 3G/Spree 3G Wheelchair...

  • Page 84: Seat-To-Floor Height Adjustment

    Test wheelchair for maneuverability. Readjust locknuts if necessary, and repeat STEPS 1-3 until correct. Snap dust cover into the caster headtube. Repeat STEPS 1-5 for opposite side, if necessary. FIGURE 14.2 Adjusting Forks Solara 3G/Spree 3G Wheelchair Part No 1154295...

  • Page 85: Wheel Locks/Anti-Tippers

    Engage the wheel locks and push against the wheelchair to determine if the wheel locks engage the rear wheels enough to hold the wheelchair. If the wheel locks DO NOT hold the wheelchair, repeat STEPS 1-6 until wheel lock engagement holds the wheelchair. Part No 1154295 Solara 3G/Spree 3G Wheelchair...
  • Page 86 Slide the wheel lock bracket along the wheelchair frame until the measurement between the wheel lock shoe and rear wheel is approximately 1.25 inches. If 1.25 inch measurement is not achievable, perform the following: Remove the mounting screw, washers and locknut that secure the connecting wheel link to the footlock lever (Detail “B”). Solara 3G/Spree 3G Wheelchair Part No 1154295...
  • Page 87 DETAIL “B” Foot Lock Lever Locknut Washers Mounting Mounting Wheel Lock Screw Screws Shoe Wheelchair Frame Adjustment Rear Wheel Connecting Wheel Holes Wheel Lock Bracket Lock Link FIGURE 2 Wheel Lock Adjustment - Footlock Part No 1154295 Solara 3G/Spree 3G Wheelchair...

  • Page 88: Using The Wheel Locks

    Pull the wheel lock handle forward to engage the wheel locks. Reverse STEP 1 to disengage the wheel locks. Push to Lock Wheel locks Push the wheel lock handle forward to engage the wheel locks. Reverse STEP 1 to disengage the wheel locks. Solara 3G/Spree 3G Wheelchair Part No 1154295...
  • Page 89 Unlocked Position Side View Side View Wheel Lock Wheel Lock Shoe Shoe Wheel Lock Handle Unlocked Position Locked Position Wheel Lock Top View Top View Handle FIGURE 3 Using the Pull to Lock Wheel Locks Part No 1154295 Solara 3G/Spree 3G Wheelchair...
  • Page 90 Locked Position Side View Side View Wheel Lock Shoe Wheel Lock Shoe Wheel Lock Handle Locked Position Unlocked Position Wheel Lock Top View Handle Top View FIGURE 4 Using the Push to Lock Wheel Locks Solara 3G/Spree 3G Wheelchair Part No 1154295...
  • Page 91 Lift up on footlock lever to disengage the footlock. Push Down to Locked Unlocked Engage Footlock Lever Footlock Lever Lift Up to Disengage Rear Wheel Rear Wheel FIGURE 5 Using the Push to Lock Wheel Locks- Footlock Part No 1154295 Solara 3G/Spree 3G Wheelchair...

  • Page 92: Operating Hublocks

    Patient Operated Hublock Perform one of the following: • Engaging the Hublocks - Push hublock lever down to engage the hublocks • Disengaging the Hublocks - Pull hublock lever up to disengage the hublocks. Solara 3G/Spree 3G Wheelchair Part No 1154295...

  • Page 93: Attendant Operated Hublock

    Engaging the Hublocks - Press hublock pedal down to engage the hublocks • Disengaging the Hublocks - Push hublock pedal up to disengage the hublocks. Locked (Hublock Lever Down) Hublock Pedal FIGURE 7 Attendant Operated Hublock/Foot Operated Hublock Part No 1154295 Solara 3G/Spree 3G Wheelchair...

  • Page 94: Installing/Adjusting Anti-Tippers

    Button Wheelchair If a 1 to 2 inch clearance cannot be obtained, contact a Frame Anti-tipper (Wheeled qualified technician. Portion) Repeat STEPS 1-3 for opposite side. FIGURE 8 Installing/Adjusting Anti-Tippers Solara 3G/Spree 3G Wheelchair Part No 1154295...

  • Page 95: Recliner Back Option

    Make sure the patient is properly positioned in the wheelchair before reclining or inclining (sitting up) to maintain maximum stability and safety. ALWAYS engage both wheel locks while reclining or inclining (sitting up) the wheelchair. Part No 1154295 Solara 3G/Spree 3G Wheelchair...
  • Page 96 Returning to upright position - Pull up and push the stroller handle towards the front of the wheelchair until the back is in the upright position. When the back reaches desired angle, slowly release the handles of the recliner cable assemblies. Solara 3G/Spree 3G Wheelchair Part No 1154295...

  • Page 97: Replacing Back/Headrest Upholstery

    Remove the twelve mounting screws and washers that secure the back upholstery to the back canes. Remove existing back upholstery from back canes. Install new back upholstery onto the back canes. Install the twelve mounting screws and washers that secure the back upholstery to the back canes. Part No 1154295 Solara 3G/Spree 3G Wheelchair...

  • Page 98: Headrest Upholstery

    Install the new headrest upholstery onto the headrest extensions. Install the six mounting screws and washers that secure the headrest upholstery to the headrest extensions. Back Cane Headrest Extension Headrest Upholstery Mounting Screws and Washers Back Upholstery FIGURE 2 Replacing Back/Headrest Upholstery. Solara 3G/Spree 3G Wheelchair Part No 1154295...

  • Page 99: Contracture Foot Assembly

    Adjustment Reinstall the mounting bolt and locknut. Securely tighten. Plate Top Mounting Bolt and Locknut Contracture Mounting Holes Support Tube FIGURE 1 Adjusting the Angle of the Contracture Assembly Part No 1154295 Solara 3G/Spree 3G Wheelchair...

  • Page 100: Adjusting The Angle Of The Bilateral Contracture Footplate

    Retighten the adjustment screw. If necessary, repeat STEPS 1-3 on remaining contracture footplate. DETAIL “A” DETAIL “B” Contracture Footplate Adjustment Adjustment Contracture Screw Screw Footplate FIGURE 2 Adjusting the Angle of the Contracture Assembly Solara 3G/Spree 3G Wheelchair Part No 1154295...
  • Page 101 Retighten the adjustment screw. If necessary, repeat STEPS 1-3 on remaining contracture footplate DETAIL “A” DETAIL “B” - SIDE VIEW Contracture Footplate Adjustment Contracture Screw Footplate FIGURE 3 Adjusting the Front to Back Angle Part No 1154295 Solara 3G/Spree 3G Wheelchair...

  • Page 102: Depth Adjustment

    Reinstall the four flat screws and locknuts that secure the contracture footplate to the footplate angle bracket. Tighten securely. If necessary, repeat STEPS 1-3 on remaining contracture footplate. Mounting Holes Contracture Footplate Flat Screws Locknuts Footplate Angle Bracket (Underneath) FIGURE 4 Depth Adjustment - Bilateral Contracture Footplate Solara 3G/Spree 3G Wheelchair Part No 1154295...

  • Page 103: Contracture Footplate Height Adjustment

    Align one of the mounting holes in the footplate bracket with one of the seven mounting holes on the contracture support. Secure the footplate bracket to the contracture support with the mounting bolt, two coved washers, washer and locknut. Securely tighten. If necessary, repeat STEPS 1-4 on remaining contracture footplate. Part No 1154295 Solara 3G/Spree 3G Wheelchair...

  • Page 104: Contracture Assembly Width Adjustment

    Slide the contracture assembly left or right to the desired location. Retighten the locknut on the angle adjustment plate to secure the contracture footplate in position. Repeat STEPS 1-3 for remaining footplate if desired. Solara 3G/Spree 3G Wheelchair Part No 1154295...

  • Page 105: Contracture Platform

    Retighten the locknut on the angle adjustment plate to secure the contracture platform in position. Bi-Lateral Contracture Platform Contracture Locknut Footplate Locknut Angle Adjustment Plate Angle Adjustment Plate Bi-Lateral Contracture Contracture Platform Footplate FIGURE 7 Contracture Assembly Width Adjustment Part No 1154295 Solara 3G/Spree 3G Wheelchair...
  • Page 106 Remove the four mounting screws and washers that secure the Heel Loop existing heel loop to the contracture footplate. Reverse STEPS 1-2 to install the new heel loop. FIGURE 8 Replacing the Contracture Footplate Heel Loop Solara 3G/Spree 3G Wheelchair Part No 1154295...

  • Page 107: Transport Ready Option

    18 Transport Ready Option WARNING Contact Invacare Corporation (800-333-6900) with any questions about using this wheelchair for seating in a motor vehicle. When feasible, wheelchair occupants should transfer into the vehicle seat and use the OEM (Original Equipment Manufacturer) vehicle-installed restraint system.

  • Page 108: About Transport Ready Packages

    As of this date, the Department of Transportation has not approved any tie-down systems for transportation of a user while in a wheelchair, in a moving vehicle of any type. It is Invacare’s position that users of wheelchairs should be transferred into appropriate seating in vehicles for transportation and use be made of the restraints made available by the auto industry.

  • Page 109: Securing The Wheelchair To The Vehicle

    The estimated seated height (HHT) from the ground or floor to the top of the wheelchair-seated occupant’s head ranges from approximately 47-inches for a small adult female to about 61-inches for a tall adult male (Frontal Clear Zone) 16in. 8in. Side View 8in. 16in. (Frontal Clear Zone) Top View Part No 1154295 Solara 3G/Spree 3G Wheelchair...
  • Page 110 18 TRANSPORT READY OPTION Securement Points Tie-Down Bracket Tie-Down Brackets FIGURE 1 Securement Points Solara 3G/Spree 3G Wheelchair Part No 1154295...

  • Page 111: Securing The Wheelchair

    Detail “A” in FIGURE 3. Pull release barrel out (Detail “B”). Rotate tie down bracket counterclockwise. Position mounting hole in tie down bracket on anchor pin (Detail “C”). Repeat STEPS 2-4 for remaining tie down bracket. Part No 1154295 Solara 3G/Spree 3G Wheelchair...
  • Page 112 Horizontal Lines DETAIL “A” Tilt Angle Indicator Rocker Tube Rocker Tube Tilt Angle Indicator DETAIL “B” Anchor DETAIL “ Anchor C” Tie Down Bracket Tie Down Bracket Release Barrel FIGURE 2 Tilt Lock Out Solara 3G/Spree 3G Wheelchair Part No 1154295...

  • Page 113: Securing The Occupant

    The wheelchair has been provided with a pelvic belt which meets the requirements of ANSI/RESNA WC/19. The pelvic belt provided by Invacare has been designed to accommodate use on either side of the vehicle. If necessary, follow the instructions below to reverse the orientation of the pelvic belt to accommodate the vehicle-anchored upper torso belt.
  • Page 114 18 TRANSPORT READY OPTION DETAIL “A” - PELVIC BELT Pelvic Belt Bracket Pelvic Belt Slot Male End (Used to secure the vehicle-anchored Tie-Down upper torso belt.) Bracket FIGURE 3 Wheelchair-Anchored Belts Solara 3G/Spree 3G Wheelchair Part No 1154295...
  • Page 115 The test for Lateral Stability Displacement for Point (P) is shown in FIGURE 4. The average test result for point (P) is 0.65-inches (16.5 mm). Rear View Point (P) NOTE: Rear view of wheelchair and human surrogate secured on test platform and tilted to 45 degrees. Test Platform ° FIGURE 4 Vehicle-Anchored Belts Part No 1154295 Solara 3G/Spree 3G Wheelchair...

  • Page 116: Positioning Belts

    Steeper belt angles also reduce the tendency for upper-torso belts to pull the pelvic belt onto the abdomen during frontal impact loading. Solara 3G/Spree 3G Wheelchair Part No 1154295...
  • Page 117 Ensure the belt(s) are not be twisted. Adjust belts as firmly as possible, being mindful of user comfort. DO position belts INSIDE of DO NOT position belts OUTSIDE armrests, wheels, etc. of armrests, wheels, etc. FIGURE 5 Positioning Belts Part No 1154295 Solara 3G/Spree 3G Wheelchair...
  • Page 118 NOTES NOTES Solara 3G/Spree 3G Wheelchair Part No 1154295...
  • Page 119 NOTES NOTES Part No 1154295 Solara 3G/Spree 3G Wheelchair...
  • Page 120 Invacare www.invacare.com Corporation Canada One Invacare Way 570 Matheson Blvd E Unit 8 © 2010 Invacare Corporation. All rights reserved. Republication, Elyria, Ohio USA Mississauga Ontario duplication or modification in whole or in part is prohibited 44036-2125 L4Z 4G4 Canada without prior written permission from Invacare.

This manual is also suitable for:

Spree 3g

Table of Contents