NEC EXP200 User Manual page 103

To initialize hard disk drives:
1.
Start the ACU.
See "Running the Array Configuration Utility (ACU)" described earlier.
2.
From the Options menu, select [Array Configuration Utility] and press Enter.
3.
Select [Configure Drives] from the main menu and press Enter.
4.
Use the cursor keys to select the hard disk drive you wish to initialize and press Insert.
5.
Repeat Step 4 so that both drives to be initialized are selected.
6.
Press Enter.
7.
Read the warning message and ensure that you have selected the correct disk drives to
initialize. Type Y to continue.
Configuring Your Server 4-41