Memory Configuration - NEC EXP200 User Manual

Memory Configuration

The following screen appears if you select "Memory Configuration" on the Advanced menu.
See the table below for the items.
Option Parameter
Installed –
memory
Available to OS –
Used by devices –
DIMM Group Installed (ex. 256MB)
#1 - #4 Status
Not installed
Disabled
Memory Retest [No]
Yes
Extended RAM 1MB
Step
[Disabled]
Description
Indicates the total capacity of the
basic memory. (View only)
Indicates the total capacity of the
memory available for OS. (View
only)
Indicates the total capacity of the
basic memory used by each device.
(View only)
Indicates the current memory status.
(View only)
"Installed (ex. 256MB)" indicates that
the memory devices operate
normally.
"Not Installed" indicates that no
memory devices are installed.
"Disabled" indicates that one or
more memory devices are defected.
Causes BIOS to retest all memory
on the next boot.
"1MB" indicates that the memory
test is done in the unit of 1MB.
"Disabled" indicates that only
memory initialization is done.
Configuring Your Server 4-13
Your Setting
[ ]: Factory-set