NEC EXP200 User Manual page 78

4-16 Configuring Your Server
Option
Interrupt
PS/2 Mouse
USB Controller
USB 2.0 Controller
Legacy USB
Support
Parallel ATA
Serial ATA
Native Mode
Operation
SATA Controller
Mode Option
SATA AHCI Enabled
SATA RAID Enabled
Parameter Description
IRQ 5 Selects the interrupt for a parallel port.
[IRQ 7]
Disabled If disabled, PS/2 mouse port will not
function.
[Enabled]
Disabled If disabled, the USB ports do not
accept the USB device class 3 (HID:
[Enabled]
Human Interface Deice).
Disabled If disabled, the USB2.0 device will not
function.
[Enabled]
Disabled Selects whether the USB keyboard is
made available in OS which does not
[Enabled]
support USB formally.
Disabled Selects whether the parallel ATA is
enabled or disabled.
[Enabled]
Selects whether the serial ATA is
Disabled
enabled or disabled.
[Enabled]
[Auto] Selects the native mode for ATA.
Note: A specific OS does not support
Serial ATA
the native mode.
[Compatible] Compatible mode:
Enhanced
Enhanced mode:
Note: The pre-installed Windows 2000
does not work in enhanced mode.
[Disabled] The server does not support the AHCI
feature. Always set this item to
Enabled
[Disabled].
[Disabled] Selects whether the RAID disk drives
that uses the onboard SATA is
Enabled
enabled or disabled.
Note: If you attempt to start the system
from SATA hard disk drive with
different setting, the data may be
destroyed.
SATA and PATA drives are
automatically detected and
recognized as legacy mode.
SATA and PATA drives are
automatically detected and
recognized as native mode.
Your Setting
[ ]: Factory-set