Planet NAS-5400 User Manual page 89

The NAS server currently supports only APC Smart Series UPS, either via serial connection or
SNMP.
Control UPS by serial port
Connect the power cable of NAS server to the UPS and connect APC RS-232 cable to COM port
on rear panel of the server. In NAS-5000 Series Manager, go to ToolkitàUPS Management to
configure "Probing interval" and "Delayed before shutdown".
Select "Control UPS by serial port", and choose "advanced port" or "basic port" from the pull-down
menu on the right side. Click "Apply" to finish.
If the power cable of the NAS server and APC RS-232 cable are connected to the UPS directly,
select "advanced port"; if more APC RS-232 cables are connected to the expansion unit for
multiple servers to share the same UPS and the NAS server has to be connected to the basic port
on the expansion unit, select "basic port".
Note:
83