Related Manuals for Planet NAS-7410
Summary of Contents for Planet NAS-7410
- Page 1 NAS-7410 Quick Installation Guide Version 1.0...
-
Page 2: Table Of Contents
Table of Contents Chapter 1 Package Contents ................3 1.1 NAS-7410 Included Items ..............3 1.2 Physical Details ................... 3 Chapter 2 Installing and Starting NAS system ............ 6 Chapter 3 Basic Configuration ................8 3.1. WEB Configuration Access ..............8 3.2. -
Page 3: Chapter 1 Package Contents
Chapter 1 Package Contents 1.1 NAS-7410 Included Items NAS-7410 x 1 HDD Key x 4 Power Cord x 1 2.5 inch HDD Screw x 16 3.5 inch HDD Screw x 12 Console Connector x 1 User’s Manual CD x 1... - Page 4 Front Panel Reset Power USB 2.0 HDD Activity Interface Description Power Button Press the button to start the NAS Reset Button This button is used to restore all the factory default settings USB Socket Connect to UPS and external HDD (FAT/FAT32/NTFS) Color Description On: Power on...
- Page 5 Real Panel LAN1/2 Power Jack Service (void) E-SATA VGA (void) USB 2.0 Interface Description Connect the two power supply cords shipped with the Power Jack system E-SATA Connect to external hard drive case Connect to UPS LAN Jack (LAN1) These RJ-45 ports support auto negotiating Gigabit Etherent interface.
-
Page 6: Chapter 2 Installing And Starting Nas System
Chapter 2 Installing and Starting NAS system This chapter covers the installation procedure of different form factors of NAS server as well as the NAS-7410. Instruction on how to startup the NAS server by setting up the basic configuration through the Admin Home page or provided software tool, PLANET NAS Finder, which is also outlined in this chapter. - Page 7 3. Place the HDD in the tray by unscrewing and screwing it. 4. Put the HDD tray back to the case. 5. Push the tray door back to the case to secure it.
-
Page 8: Chapter 3 Basic Configuration
Chapter 3 Basic Configuration 3.1. WEB Configuration Access The NAS-7410 provides GUI (Web based, Graphical User Interface) for management and administration. The default IP address of NAS server is 192.168.0.100. You may now open your web browser, and insert http://192.168.0.100 in the address bar of your web browser to login web configuration page. -
Page 9: Hdd Formation And Raid Setting
3.2. HDD Formation and RAID Setting For a new attached hard disk, you should format the HDD before any setting. 1. Go to <Volume> <Create> to configure the server “Volume Name” and “Volume Type”. 2. Please press the Volume Type to create RAID after selecting Free Disk, and check “Apply”... -
Page 10: Further Information
Further Information This guide is used to help you startup your NAS-7410 settings. It is also recommended to check the user manual (CD-ROM) for more details of the system and user configuration. - Page 11 This page is intentionally left blank...
- Page 12 This page is intentionally left blank...
Need help?
Do you have a question about the NAS-7410 and is the answer not in the manual?
Questions and answers