Table of Contents
Advertisement
Read Permissions
Change Permissions
Take Ownership
4.4 Network Setup
Use this section to set the network types supported by the NAS server. The default setting allows
for simultaneous use of Windows, UNIX, and Mac networks. You may change the defaults
according to your needs.
4.4.1 Windows Network
The system administrator can choose to enable Windows networking so that the Windows clients
can access the shared folders of the NAS server. To do so, select "Enable Windows networking",
and then select "Workgroup" or "Domain" below.
If "Workgroup" is selected, type the workgroup name and then press "Apply".
If "Domain" is selected, type the Windows domain name in the "Domain:" field, in the "Account
name:" and "Password:" fields type in the authentication data of the Windows account that
belongs to the Administrator group, and then click "Apply" to complete.
66
Advertisement
Table of Contents
