Table of Contents
Advertisement
1. G. LAN: Gigabit Ethernet Port
2. LAN 1: 10/100M Ethernet Port
3. COM (for UPS): The NAS-5400 uses a DB-9 connector for its serial port connection. The pin
assignments of this connector are as follows:
4. LAN 2: 10/100M Ethernet Port
5. Chassis FAN
6. Redundant Power Supply #1
7. Redundant Power Supply #2
8. Power Fail Buzzer Reset Button
4
Pin #
Signal Name
1
DCD, Data carrier detect
2
RXD, Receive data
3
TXD, Transmit data
4
DTR, Data terminal ready
5
GND, ground
6
DSR, Data set ready
7
RTS, Request to send
8
CTS, Clear to send
9
RI, Ring indicator
Advertisement
Table of Contents
