Table of Contents
Advertisement
To add SNMP access privileges, click on "Create". A new screen will appear, where you can select
a community name along with the host and Subnet /Mask (e.g. 192.168.1.0/255.255.255.0)
belonging to this community. Then select the "Access privileges from SNMP": either "read only", or
"writeable". "Read only" means the community hosts can only read information through SNMP,
"writeable" means the community's hosts can also modify some read and write fields. Click "OK"
to confirm or "Next" to add more privileges.
Removing SNMP Access Privileges
To remove SNMP access, select an option under "Access privileges" (use Ctrl for multiple and
Shift for continuous selection), and then click "Remove".
Modifying SNMP Access Privileges
To modify existing privileges, select an option under "Access Privileges", remove it and add a new
privilege.
4.6.3 UPS Management
82
Advertisement
Table of Contents
