Table of Contents
Advertisement
2. Cannot connect to host: xxxxxx (xxx.xxx.xxx.xxx).
This message indicates that the system could not connect to the SMTP server. This may
be due to one of the following reasons:
3. Mail server connection failed.
This message indicates that the SMTP server has timed out and not responded within 30
seconds. Verify that the SMTP server is working properly.
4. Send email error: xxx.
This message indicates an unknown mail error. Note the error code and contact the
system manufacturer's representative.
5. Cannot create socket resource.
This message indicates that the system has insufficient resources to execute the mail
send operation. Reboot the server to correct the problem.
Q: Cannot add multiple user IDs to a workgroup at a time.
A: Update the web browser to IE 5.5 or above.
Q: Time synchronization failed to work.
A: If time synchronization failed to work after the time synchronization setting is configured,
please check:
1. If a hostname is entered in the "Network time server:" column, if yes, try to enter the IP
of the time server instead of the hostname, or check if the DNS and gateway of the
network adapter is properly entered.
2. If the configured network time server still exists.
3. If the configured network time server still works properly.
i.
Network connection broken. Check the network connection and try
again.
ii. SMTP server unavailable. Confirm that the server is working properly.
iii. SMTP server rejected the message. Verify that the SMTP server does
not filter out junk messages. Contact the system administrator or try
using a different SMTP server.
131
Advertisement
Table of Contents
